1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
DP25B-E
1/8 DIN Thermocouple and RTD Panel Meter with Large, Selectable Color Display
Choose a Variant
Output Signal
Supply Voltage
Input Type
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 0.02 % |
| Analog-to-Digital Technique | Dual slope |
| Approvals | CE, EMC 2014/30/EU |
| CMRR | 120 dB |
| Control Output | N/A |
| Cutout Dimensions | 1.772 x 3.622 in |
| Display Note | 4-digit, 9-segment, 21 mm (0.83") red, amber or green LED (programmable) |
| Display Type | LED |
| Form factor | 1/8 DIN |
| Height | 1.89 in |
| Impedance Input | 100 MΩ for 100 mV or ± 50 mV range; 1 MΩ for 10V or ± 5V range; 5 Ω for 20 mA current input |
| Input Range Note | 0 to 100 mV, ± 50 mV, 0 to 10V, ± 5V, 0 to 20 mA, 4 to 20 mA |
| Input Type | Voltage, Current |
| Internal Resolution | 15 bit |
| Isolation | Dielectric strength to 2500V transient per 3 mm spacing based on EN 61010 for 260 Vrms or Vdc |
| Length | 6 in |
| Materials | Polycarbonate |
| Max Error Strain/Process | ± 0.03% |
| Measurement Type | Current, Voltage |
| Mounting | Panel |
| NMRR | 60 dB |
| Number of Digits | 4 |
| Number of Inputs | 1 |
| Operating Temperature, Max | 50 °C |
| Operating Temperature, Min | 0 °C |
| Output Signal | N/A |
| Polarity | Automatic |
| Power Consumption | 11 W |
| Protection | 240 Vrms max for voltage input ranges; 200 mA for current ranges |
| Reading Rate | 3/sec |
| Relative Humidity | 90% @ 40°C non-condensing |
| Sampling Rate | 3 Hz (3 updates/second) |
| Sensor Excitation | 24 Vdc @ 25 mA or 12V @ 50 mA; 10V @ 120 mA or 5V @ 60 mA |
| Span Temperature Coefficient | ± 50 ppm/°C |
| Step Response | 2 s |
| Storage Temperature, Max | 85 °C |
| Storage Temperature, Min | -40 °C |
| Supply Power Note | 240 Vrms overvoltage protection |
| Supply Power Type | AC |
| Supply Voltage | 115 Vac |
| Warm Up Time | 30 min |
| Weight | 36 g |
| Width | 3.78 in |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
Anonymous from
Tough Little Meter
Nice meter. We use it to display pressure when calibrating relief valves. Holds up pretty well in a rough environment as long as you don't beat on the front panel. Instructions are okay but not the best...however, tech support is exceptional! You can't go wrong with this meter.
Date published: 2020-09-17
Rated 3 out of
5
by
didmel19 from
Doesn't come w/ a power cord?
We bought this and it didn't come with a power cord. I did not see that in the advertised information so that is a bit disappointing. Gets the job done if you can plug in.
Date published: 2017-02-17
Rated 5 out of
5
by
Richard Pare from
Excellent panel meter
Excellent panel meter. Used for Indianapolis car setup to save a lot of time both for initial assembly as wall as during testing
Date published: 2024-09-29
Rated 5 out of
5
by
Anonymous from
Always Looking To OMEGA
Omega had the part in a timely matter and was able to keep the down time to a minimum. Price was competitive. Website is easy to maneuver and to search for product. Inside customer service always helpful.
Date published: 2024-04-18
Rated 5 out of
5
by
ACole from
Reliable
We purchase these quite a bit and have been pleased
Date published: 2023-01-25
Rated 5 out of
5
by
Saint from
Worked as expected, useful setup instructions.
Worked as expected; Used to read force placed on an arbor press during pressing of Force Pressure critical components.
Date published: 2022-09-26
Rated 5 out of
5
by
Tbending from
Great Panel Meter!
Great panel meter readout. Easy setup and installation.
Date published: 2022-03-30
Rated 5 out of
5
by
Progressive Electric from
Omega Panel meter review
Great meters, very durable and easy to program. Been using them for years
Date published: 2022-01-04