RTD-810-Series

Sondes RTD avec filets de montage et fils de connexion

RTD Probes with Mounting Threads and Lead Wire

(0)

Modèles en stock

Precision 100 Ohm Class A DIN Platinum Element
Temperature Coefficient (Alpha) = .00385 ohm/ohm/°C
3-Wire Configuration with PFA Insulated and Jacketed Lead Wire and Miniature 3-Pin Connector with Mating Connector
Temperature Range -200 to 750 ºC (Cable to 260 ºC)

Voir l'aperçu du produit

RTD-810-Series

À partir de ^$ 185.19

Modèles en stock

Acheter des modèles

6 variations disponibles

Voir toutes les options de série ci-dessous

Fiche technique

Aperçu du produit

Accuracy Class A
Cable Material Nickel, Copper
Insulation PFA
Nominal Resistance 100 Ω
Nominal Resistance/Curve Note Provided with High-Accuracy Class “A” 100 Ω Element (Standard)
Number of Wires 3
Probe Diameter 0.125 in
Probe Length 4.5 in
Probe Type High-Accuracy Fluid Immersion RTD Sensors
Process Connection Size 1/8 in
Process Connection Type NPT Male
Sensing Element 100 Ω Class “A” DIN Platinum Element
Series ID RTD-810-Series
Sheath Material 304 Stainless Steel
Temperature Probe Style Immersion Probe
Temperature Sensor Type RTD
Wire Gauge 26 AWG
Wire Type Stranded

Supported Applications

The Omega RTD-810 Series consists of high-accuracy fluid immersion resistance temperature detector (RTD) sensors designed for monitoring temperature in fluid and pressurized applications. These probes feature a stainless steel probe stem and mounting fitting, configured with lead wire outputs to connect directly to instrumentation.

Operating Conditions & Performance

The series utilizes 100 Ω Class "A" DIN sensing elements. The measurement range extends from -200 °C to 750 °C for the sensor element, with a maximum cable temperature of 232 °C. Accuracy is specified as ±0.15°C @ 0°C in accordance with IEC Class A standards.

Physical dimensions include a probe diameter of 3 mm (1/8 in) and a stem length of 114 mm (4 1/2 in). The process connection is provided via a 1/8 NPT thread. Electrical construction follows a 3-Wire configuration for connecting to most instruments.

Configuration Options

The RTD-810 Series offers configurable termination options and accessories to suit specific installation requirements:

Sensing Element: All models feature a 100 Ω Class "A" DIN element.
Cable Length & Insulation: Standard configuration includes a 1 m (40 in) long PFA insulated cable.
Connector Types: Available with MTP-U-M Male connector, OTP connector, or TA3F connector. Specific mating connectors include the MTP-U-F and OTP-U-F models.
Cable Clamps: Options include PCLM-MTP for MTP configurations and PCLM for other terminations.

The series supports additional accessories, including the PUK-2T DIN rail terminal block and the HH804U high accuracy Pt100 RTD thermometer. Female mating connectors are sold separately.

Key Product Differences

Variants within the RTD-810 Series differ primarily by their termination style, as indicated in the model number guide: RTD-810 - <Sensing Element> - <Connector Type>. Specific configurations include:

RTD-810: Equipped with an MTP Connector.
RTD-810-OTP: Features an OTP connector on the PFA cable.
RTD-810-TA3F: Includes a TA3F connector.

All listed variants maintain identical sensing element specifications, maximum temperature ratings of 750 °C (cable 232 °C), and the same stainless steel wetted materials. Other options are available through DwyerOmega.

PDF & Manuels

Data Sheet - RTD-810 View More

View Less

Conformité