Need assistance? Call us: 1-800-663-4209
CX136
Push On Connectors with Solderless Crimp Contact
Models In Stock
- NO SPECIAL TOOLS REQUIRED!
- Heavy Duty Construction
- Rated to 215°F (105°C)
- Solderless Connection
CX136
From
$
5.69
Models In Stock
Product Overview
- Additional Features 1 Flame-Retardant
- Electrical Connection Pins
- Operating Temperature, Max 105 °C
- Operating Temperature, Min 0 °C
- Series ID CX136
Supported Applications
The Omega CX136 series consists of heavy-duty, solderless push-on style connectors with crimp contacts. These accessories are designed for use with various PX-series transducers to provide a secure electrical connection without the need for soldering.
Operating Conditions & Performance
The connector shells are constructed from flame-retardant thermoplastic, and the internal contacts feature gold plating over nickel plating. The series is rated for an ambient operating temperature of 105°C (215°F).
Configuration Options
The CX136 series offers multiple configurations defined by the number of contacts and specific sensor compatibility:
- CX136-3: 5-contact connector compatible with PX141, PX142, PX143, PX162, PX163, and PX164 sensors.
- CX136-4: 4-contact connector compatible with PX170, PX26, PX137, and PX138/PX139 sensors.
- CX136-8: 8-contact connector compatible with the PX149 sensor.
Housing options include black or beige thermoplastic shells. The model number follows the format CX136-<NUMBER>, where the suffix indicates the specific contact configuration and transducer compatibility (e.g., CX136-4 for PX26).
Key Product Differences
Variants within the series are distinguished by their pin count and the specific Omega pressure or force transducers they interface with. The 5-contact model serves a broader range of legacy and modern PX-series sensors, while the 4- and 8-contact models address specific high-pin-count or compact sensor requirements.
PDFs & Manuals
Show Ratings & Reviews
Rated 4 out of
5
by
LivIvy from
Good quality; need to solder
I bought 2 of these along with the pressure transducer PX-137. It fits nicely onto the transducer pins, but my solid core-22 awg wire fits loosely so I will need to solder in order to ensure a steady connection. 20awg is probably a better fit.
Otherwise, it's great quality!
Date published: 2016-09-14
Rated 5 out of
5
by
Cray from
They work well with the pressure sensor
This connector are a must for the Pressure Sensor (PX26-005GV). They help provide an optimal connection.
Date published: 2024-02-14
Is there a drawing or tutorial on how to put the wires in securely? It is not clear how to do it right. Is it supposed to be stripped first or not?
Hi, the CX136 series connectors unfortunately do not have an instruction sheet available at this time since it is a connector that is typically an accessory for some of our pressure transducers. It will accept solid or stranded wire from 22-26 AWG. Do not strip the wire. Looking down into the top of the connector (opposite from the actual sockets) you will see some V shaped metal blades. Insert the wire down into the connector alongside the metal blades. Then pull the wire gently so that it bends across the top of the blades in the groove. You should then be able to pull it firmly down and across the blades so that they cut into the insulation and grip the actual wire. Please email our Tech Support engineer back that connected with you, if you have any further questions. Thank you!
Date published: 2023-09-01