1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
FPD3100-Series
Positive Displacement Flow Meter for Corrosive Liquids
- PPS Body
- Temperatures up to 80ºC (176ºF)
- NPT or BSP Threads
FPD3100-Series
From
$
1,334.82
Product Overview
- Accuracy Detail ±0.5% of reading
- Electrical Connection Stripped Leads
- Enclosure Ratings IP67, NEMA Type 6
- Housing Material PPS
- Media Compatibility Corrosive Liquids
- Mounting Pipe
- Number of Digits 7
- Repeatability ±0.03%
- Sensor Type Reed Switch, Hall Effect
- Supply Power Note Hall Effect Sensor Power : 4.5 to 24 Vdc, 7.5 mA , Reed Senseor Power : 30 Vdc, 500 mA
The FPD3100 Series positive displacement flowmeters are affordable and accurate. One primary feature is the ability to maintain consistent accuracy despite changing viscosity conditions. The meter’s solid construction and excellent dynamic response are well suited to the measurement of many corrosives as well as other non-abrasive fluids. Since there is no need for straight run piping upstream or downstream of the flow meter, the FPD3100 flow meters are simple to use and to install. The meter has good resolution and high accuracy at low flow rates.
PDFs & Manuals
Show Ratings & Reviews
The manual for FPD3102 indicates there is a rotor kit that can be purchased - FPD3102-ROTOR. Is this available?
Thanks for your question. Yes, it is available. Email us to omegasales@dwyeromega.com for a formal quote.
Date published: 2023-11-21
For the # FPD3105 Model, the minimum flow rate for cP of less than 5 is listed as 0.5 GPM in the data sheet and 0.8 GPM in the user manual. Which value is correct? What is correct maximum flow rate?
Thank you for your inquiry! For the FPD3105 the flow range for liquids below 5 cP is actually 2.6-26 GPM
Date published: 2022-03-25