1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
FDT-25
Choose a Variant
Form factor
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 1 % |
| Accuracy Detail | ±1% of reading at rates >(0.2m/s) 0.6 ft/s |
| Battery Size and Type | NiMh AAA |
| Cable Length | 5 m |
| Commodity Code | 9026.10.5000 |
| Data Interface | RS232 |
| DepthValue | 20.55 |
| Display Language | English, Chinese |
| Display Note | 4 x 16 English letters, 4 x 8 Chinese characters |
| Display Type | LCD |
| ECCN | EAR99 |
| Enclosure Ratings | IP65 |
| Form factor | Pipe Remote mount |
| HeightUoM | IN |
| HeightValue | 7.3 |
| Materials | ABS |
| Measurement Type | Transit Time |
| OkForExport | true |
| Operating Temperature, Max | 60 °C |
| Operating Temperature, Min | -20 °C |
| Pipe Size, Max | 4 in |
| Pipe Size, Min | 0.75 in |
| Process Temperature, Max | 90 °C |
| Process Temperature, Min | 0 °C |
| RRS Code | 1 |
| Relative Humidity | 85% RH |
| Repeatability | 0.002 |
| Response Time | 0 to 999 sec |
| Supply Power Note | 3 "AAA" NiMH built-in batteries (included) with 100 to 240 VAC charger, fully charged lasts over 10 hrs |
| Supply Power Type | Battery |
| Taxonomy Level 1 | SFU |
| Taxonomy Level 2 | TX |
| Taxonomy Level 3 | HH |
| Taxonomy Level 4 | PO |
| Transducer Type | Clamp-on |
| Velocity, Max | 32 m/s |
| Velocity, Min | -32 m/s |
| WeightUoM | LB |
| WidthValue | 18.65 |
| Country of Origin | China |
| See All Specs | |
PDFs & Manuals
Software & Drivers
Accessories
cables
consumables
sensors
Show Ratings & Reviews
Rated 4 out of
5
by
Zayna from
Decent Portable Flow meter
The flow meter is decent. But the manual is sorely lacking. I had to look up youtube videos because it doesn't tell you anything about applying the gel, or the chain or anything. I don't understand how to use the chain. It should have come with straps to keep the magnets in place because they tend to slip on a vertical pipe. Other than that the flow meter seems to work ok, but I was not very sure how accurate the flow is.
Date published: 2021-05-07
Rated 3 out of
5
by
JoshMechEIT from
Poor Submenu for Compatible Transducers
Plenty of positives to the meter. The biggest downfall is that the compatible transducers are not listed in the transducer type submenu. There is no reason for this to be a confusing process but this submenu in particular is terrible.
Date published: 2021-03-31
Rated 5 out of
5
by
Ricky JPG from
Easy to use
We purchased this to verify flow for hydronic and plumbing flushing in a government facility. The meter was easy to set up after reviewing the directions. We have been able to use it on multiple size pipe lines to verify we have the proper water velocity.
Date published: 2025-08-14
Rated 5 out of
5
by
Tiffannie Brown from
Thats why we purchase from Omega
Handles the job perfectly, that's why we purchased from Omega
Date published: 2023-10-20
Rated 3 out of
5
by
Pat Galvin from
Meters worked well, overall.
I ordered seven of these meters. One shipped with a completely dead battery that would not hold a charge. Very disappointing. Others worked well on bare galvanized and bare stainless steel pipe. Ask Omega tech support for a helpful install guide (you have to ask for it - not included in box).
Date published: 2023-02-20