1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
PX190
OEM Style, Compact Pressure Transducers with Cable | PX190
Models In Stock
PX190
From
$
193.38
Models In Stock
Product Overview
Show Ratings & Reviews
Rated 4 out of
5
by
John E from
Great sensor, details are lacking.
Like the design, but the termination and artificially stiff backer rod in the cable are both sub-par.
Date published: 2021-12-26
Rated 5 out of
5
by
Rod B from
Pressure transducer for repair of a machine we use
Good. Works as advertised. Old model was discontinued.
Date published: 2023-05-30
For the PX191 (voltage output signal) transducers, what are the wires? I'm specifically wondering about the number of wires and the gauge as well as how a customer can pick out which wire corresponds to what.
The PX191 Series pressure transducer is a 3 wire voltage output device. Wiring is as follow. Red = + Input Power, White = + Output Signal, Black= Common (- Input Power & - Output Signal
Date published: 2021-10-22
Are the PX191 series sensors suitable for diesel engine fuel pressure monitoring (150psi)? Wetted parts will be in contact with the diesel fuel. My main concern is fire risk if the sensor becomes a heat source.
Thank you for your inquiry, we recommend that you use an intrinsically safe sensor whenever monitoring any media that is flammable.
Date published: 2022-09-19
According to your website power supply requirement is : 5V DC for PX191 Models, 10 to 28V DC for PX192 Models. I have a PX191, 3-wire voltage output of 0.5 - 4.5 V. I'll repeat my earlier question- what is the amount of current required for these.
Becky, thank you for contacting Omega Engineering. Maximum current draw would be 24 mA. You can consider using the PST-4130 power supply. If you have more questions please email pressure@omega.com
Date published: 2021-09-23
What power supply do you recommend for a PX109-060G5V pressure sensor. It will have to power 4 sensors. Thank you.
The PX109-060G5V requires 8 to 30 VDC unregulated power. Current draw from the power would be approx 10 mA. The PSU-93 power supply has sufficient current capability to drive 4 of these sensors.
Date published: 2025-04-12
What is the maximum resolution of the transducer? We need to measure in resolution of 0.001 torr.
Thank you for you inquiry
This unit will not woirk to .001 torr
please contact the pressure engineers to discuss options that are available.
Date published: 2021-07-26
Several questions - What will the voltage at 1 Torr be and what will the voltage be at 2 Torr? What is the mass of the unit?
The output from the PX190 is 0.5 to 4.5, from zero to full scale. 1 Torr = 0.019337 PSI, the amount of change in the output that you would see from a 75 PS I sensor would be so small we would recommend that you choose a lower range sensor.
Date published: 2021-08-09
A PX-191 appears to require a 5 Vdc excitation voltage. What is the current draw?
Thank you for your inquiry
Power Supply requirement is 10 to 28V DC with the maximum current draw would be 24 mA
Date published: 2021-09-23
Will PX190 work with gas and liquid pressures?
Thank you for your inquiry
Yes the unit has 17-4PH stainless steel wetted parts so as long as the media will work with stainless steel that would be fine.
Date published: 2021-03-15