1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
OM-CP-STATE101A
State Data Logger
Choose a Variant
Measurement Type
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 1 min/month |
| Accuracy Detail | ±1 minute/month at 20°C, stand alone data logging |
| Battery Size and Type | 3.6V Li-ion |
| Battery life | up to 10 yr |
| Baud Rate | 115200 |
| Commodity Code | 9029.20.5000 |
| Data Interface | USB |
| DepthValue | 4.4 |
| Display Measuring Units | °C, °F, ft/min, k/h, kts, m/s, mph |
| ECCN | 3A992.a |
| Electrical Connection | Removable Screw Terminal |
| GrossWeightValue | 0.23 |
| Height | 1.4 in |
| HeightUoM | IN |
| HeightValue | 2.5 |
| Impedance Input | >60 kΩ |
| Internal Weak Pull-Up | <60 μA |
| LED Indicators | Green LED Blinks: 10 second rate to indicate logging; 15 second rate to indicate delay start mode;Red LED Blinks: 10 second rate to indicate low battery and/or full memory |
| Length | 0.6 in |
| Materials | ABS, Aluminum |
| Measurement Type | Voltage |
| Memory | 406,323 readings; software configurable memory wrap |
| Memory Modes | Yes |
| Multi Start/Stop Mode Note | To Start the Device:Press and hold the pushbutton for 5 seconds, the green LED will flash during this time. The device has started logging To Stop the Device:Press and hold the pushbutton for 5 seconds, the red LED will flash for 3 seconds and then the green LED will flash for two seconds. The device has stopped logging |
| NetWeightValue | 0.23 |
| Number of Measurements | 1 |
| OkForExport | true |
| Operating Temperature, Max | 80 °C |
| Operating Temperature, Min | -40 °C |
| Protection | An optional password may be programmed into the device to restrict access to configuration options. Data may be read out without the password. |
| RRS Code | 1 |
| Real Time Recording | The device may be used with PC to monitor and record data in real-time |
| Relative Humidity | 0 to 95% RH non-condensing |
| Resolution | 4 Hz |
| Samples,Max | 0.25 sec |
| Sampling Rate | 4 Hz (4 updates/second) |
| Software | XP SP3/Vista/7 and 8 (32 and 64-bit) |
| Start Modes | Delayed Start, Immediate Start, Push-button |
| Supply Power Type | Battery |
| Taxonomy Level 1 | MGI |
| Taxonomy Level 2 | DL |
| Taxonomy Level 3 | PO |
| Taxonomy Level 4 | PO |
| Voltage Input Range | 0 to 30 vdc |
| Weight | 0.9 oz |
| WeightUoM | LB |
| Width | 2.2 in |
| WidthValue | 5.7 |
| Country of Origin | United States |
| See All Specs | |
PDFs & Manuals
Software & Drivers
Show Ratings & Reviews