Skip to search Skip to main content Skip to navigation

Need assistance? Call us: 1-800-663-4209

We noticed you are in , please visit your local site by clicking the below link for regional offers and support.

LAQ

OMEGALAQ Liquid Temperature Indicating Lacquers

Models In Stock
  • Easy to Use
  • Temperature Ranges from 79 C (175F) to 1093C (2000F)
  • Fast Response Time
LAQ
From $ 32.48
Models In Stock
OMEGALAQ Liquid Temperature Indicating Lacquers LAQ LAQ
loading all models
Product Overview
  • Accuracy ± 1 %
  • Process Temperature, Max 2000 °F
  • Process Temperature, Min 0 °F
  • Response Time 0.001 sec
  • Series ID LAQ
  • Temperature Measurement, Min 0 °F
  • Volume 2 oz

Supported Applications

The OMEGALAQ™ Liquid Temperature Indicating Lacquers are temperature-indicating liquids designed for monitoring temperatures on surfaces where solid markers may not leave a distinct mark. The product is applied to smooth surfaces including glass and polished metal, as well as fabrics, rubber, and plastics.

Operating Conditions & Performance

The series operates by changing from dull-opaque to glossy-transparent when the specified temperature is reached. This phase change occurs on the order of milliseconds (0.001 sec). The lacquers are available for process temperatures up to 2000°F (1093°C) with an accuracy of ±1.0%. Specific temperature points range from 175°F to 325°F, 400°F to 700°F, 750°F to 1200°F, and 1250°F to 1900°F.

Notes on operating conditions include:

  • Certain temperature points are identified as best candidates for high vacuum applications.
  • The product tends to outgas in a vacuum environment.

Configuration Options

The series is offered in 2-oz bottles of liquid lacquer, with model numbers following the format LAQ-0(*)G where (*) represents the temperature rating. For example, LAQ-0250G indicates OMEGALAQ™ liquid rated for 250°F (121°C). The series supports thinning to ensure workable consistency without affecting accuracy.

Available options and accessories include:

  • TAP Adhesive Labels: Rated to a maximum of 356°F (180°C), supplied in packages of 100 per roll. Note that the source lists TAP labels as rated to 350°F, with an additional note specifying a maximum temperature of 180°C (356°F).
  • GREEN LABEL THINNER: Available in 2 oz bottles or pint sizes.
  • LAQ-KIT-(*)†† Experimental Kit: Includes 2 oz lacquer, 2 oz thinner, and 100 TAP adhesive labels. Temperature ranges for kits are available from 175° to 325°F.

Key Product Differences

Variants within the LAQ series differ by their specific temperature activation point. The catalog lists discrete temperatures across four primary bands:

  • 175°F to 325°F band: Includes points such as 175°, 200°, 225°, 250°, 275°, 300°, 313°, and 325°.
  • 400°F to 700°F band: Includes points such as 400°, 425°, 450°, 475°, 488°, 500°, 550°, 575°, 600°, 650°, and 700°.
  • 750°F to 1200°F band: Includes points such as 750°, 800°, 850°, 900°, 950°, 1000°, 1050°, 1100°, 1150°, and 1200°.
  • 1250°F to 1900°F band: Includes points such as 1250°, 1300°, 1400°, 1450°, 1500°, 1600°, 1700°, 1800°, and 1900°.
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 6ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

How can I imagine the process exactly? Once the limit temperature is reached, the consistency changes? Is there also a color change or is the substance then only transparent as described in the data sheet?

Asked by: Laserdrilling123
Thank you for your inquiry Laserdrilling123. At the start, apply a thin smear to the working surface before heating begins. It dries almost instantly to a mark. When the stated temperature is reached on subsequent heating, this mark liquifies sharply. A melted OMEGALAQ™ coating does not revert to its original dull-opaque appearance but remains glossy transparent which makes subsequent interpretation a simple matter. There is no color change.
Answered by: Application Engineer MC
Date published: 2024-04-26

I need this product for a ultrfast laser drilling process with stainless steel, so that you only have a very short temperature rise and then it drops directly down to room temperature. Can this temperature still be identified?

Asked by: Laserdrilling123
Thank you for your inquiry. This item has a very fast response time and will react as soon as the temperature value has been reach or exceeded.
Answered by: CB Engineer
Date published: 2021-03-23

What is the accuracy of the stated temperatures? Are there tolerances associated with each product type?

Asked by: AnthPetch
Thank you for your inquiry. The tolerance is ±1% of value.
Answered by: Application Engineer CB
Date published: 2021-04-15

Does this product work the same in an inert gas as it does in air? Does it work the same in a mild vacuum (~ 200 mTorr)? Will it outgas and form deposits in a vacuum chamber?

Asked by: jnmert73
Thank you for your inquiry. OMEGA LAQ cannot be used in any vacuum environment.
Answered by: CB Engineer
Date published: 2020-11-16

I am trying to create a waste log and need the density of this product, is it available?

Asked by: Swim
Thank you for your inquiry. Unfortunately we do not have a density specification for this product.
Answered by: Application Engineer JB
Date published: 2021-12-14

Is OMEGALAQ oil resistant? I would like to use it on the races of a high speed ball bearing.

Asked by: Gerschman
Hi Gerschman Thank you for the inquiry. The LAQ material is not oil resistant. Best regards OMEGA
Answered by: NorwalkAE
Date published: 2020-09-28

What is the electrical conductivity of the laquer?

Asked by: John22
Hi John22, Thank you for the inquiry. This product has not been evaluated for electrical conductivity. Best regards OMEGA
Answered by: NORWALKAE_RS
Date published: 2022-05-02

Do the lacquers react differently depending on the gas environment they are in? I.e. oxygen, nitrogen,...

Asked by: claire123
Hi Clair, Thank you for the inquiry. The LAQ series were verified in standard conditions (STP) air environment. You would need to test to verify in alternate conditions, gases, pressures, etc. Best regards, OMEGA
Answered by: NorwalkAE_RS
Date published: 2023-10-07
  • y_2026, m_8, d_25, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_LAQ-0300G, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_omega
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 13ms
  • QUESTIONS, PRODUCT
en-US
en
Save Configuration