1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
DVG-64A
0 to -30 inHg, Vacuum
Choose a Variant
Measurement Pressure Type
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy Class | > 0.25% |
| Accuracy Detail | +/-10% or +/-10 Micron, whichever is larger (50 to 2000 Microns) at 75°F |
| Auto-Shutoff | 10 min above 19000 Microns, 1 hr below |
| Battery Size and Type | Alkaline AA |
| Battery life | 600 hr |
| Display Type | Backlit LCD |
| Height | 5.5 in |
| Length | 1.5 in |
| Measurement Pressure Type | Vacuum |
| Measurement Pressure, Max | 190000 Pa |
| Measurement Pressure, Min | 0 Pa |
| Number of Batteries | 3 |
| Operating Temperature, Max | 150 °F |
| Operating Temperature, Min | 0 °F |
| Pressure Accuracy | ± 10 % |
| Process Connection Size | 1/4 in |
| Process Connection Type | SAE Flare Fitting |
| Proof Pressure | Up to 800 psi |
| Sample/Display Rate | 0.5 sec |
| Sensor Type | Thermistor |
| Supply Power Type | Battery |
| Weight | 6 oz |
| Width | 2.75 in |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews
Rated 4 out of
5
by
GaryP from
1 Atm. to 1 mTorr with a mechanical gauge.
This meter works great in conjunction with a mechanical gauge. It starts working at 20 Torr, just before a mechanical gauge reaches zero. The combination gives a full range down to 1 mTorr. I wish there was a way to stop the auto shut off as the gauge goes through a calibration startup when I turn it back on. The instructions say nothing about the autocalibration. Does calibration work at vacuum? Don't know. A DC input from a external supply would solve this. (Or a comment in the instructions but instructions are hard. We need Monk's brother Ambrose Monk)
Date published: 2020-03-23