1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
OM-240-Logger
Enregistreur de données Ethernet à 24 canaux Omega avec serveur Web intégré
Omega 24-Channel Ethernet Data Logger with Embedded Web Server
Modèles en stock
- Compatible avec Omega Enterprise Gateway
- 24 canaux d'entrée analogiques différentiels indépendants, 2 entrées numériques et 1 sortie numérique
- Serveur Web intégré pour la configuration, la visualisation des données et le diagnostic
- Thermocouples indépendants, PT100/200/500/1000, NTC, mV, mA, mV/V, corde vibrante
OM-240-Logger
À partir de
$
4,629.95
Modèles en stock
Aperçu du produit
- Remarque sur l'alarme Tension d'entrée maximale : 24V (courant max : 10mA), tension d'entrée minimale : 5V (courant max : 2mA), fréquence de mesure : fréquence max 1 kHz, précision : 0,1 Hz, deux entrées numériques opto-isolées sélectionnables individuellement pour fermeture de contact. Une sortie relais (pour alarme, etc.) : fermeture sans potentiel (basse tension 30V, 2A)
- Débit en bauds 9600 à 115200
- Configuration Logiciel Windows PC, plateforme OS indépendante
- Processeur et mémoire Microcontrôleur ARM Cortex-M3 avec 1 Mo de mémoire Flash, processeur 120 MHz, accélérateur ART, Ethernet
- Précision du courant 0.0001
- Plage de mesure du courant 4 à 20 mA
- Interface de données Ethernet ; RS485 ; RS232 ; USB
- Remarque sur l'interface de données LAN Ethernet : 10/100 Mbps, RJ45, isolé RS232 : 9 broches, DE9. Port DCE pour connexion modem GSM/GPRS en option Débits en bauds : sélectionnables de 9600 bps à 115,2 kbps Format par défaut : 8 bits de données ; 1 bit de stop ; pas de parité USB : clé USB 2.0 uniquement (FAT 32), 5 V 200 mA RS485#1 ET RS485#2 Connexion : port à 5 bornes à vis pour max. n° 254 capteurs bus numérique Modbus RS485 Interface de communication : RS485 - optocouplé Protocole de communication : MODBUS RTU
- Affichage LCD
- Remarque sur l'affichage Petit écran LCD graphique rétroéclairé 128 x 64 dpi avec clavier à membrane pour une gestion locale minimale sans PC. Clavier pour démarrer une acquisition de données, affichage séquentiel des dernières lectures stockées pour chaque canal (ID du capteur, lecture convertie, unité de mesure), état de l’appareil, téléchargement des données et mise à jour du firmware/pages Web via clé USB, mode sécurisé (sauvegarde/formatage/restauration de la carte SD interne).
- Échelle du capteur externe Thermocouple : K -200 à 1370°C, B 600 à 1820°C, J -200 à 1200°C, T -200 à 400°C, E -200 à 1000°C, R -20 à 1760°C, N -260 à 1300°C, S -20 à 1760°C, Thermistance : -50 à 150°C
- Hauteur 9.09 in
- Impédance d'entrée 20 MΩ
- Tension de bruit d'entrée 5,42 µV crête à crête
- Type d'entrée Externe
- Longueur 4.61 in
- Courant, max 5 A
- Type de mesure Courant ; contrainte ; température ; tension
- Mémoire 1 Mo de RAM, carte SD de 2 Go
- Remarque sur la mémoire Carte SD de 2 Go pour les données (environ 5 millions de points de données) et les pages Web
- Température de fonctionnement, max 60 °C
- Température de fonctionnement, min -30 °C
- Humidité relative 80 % HR
- Remarque sur la résolution Résolution du thermocouple : 1 µV à pleine échelle pour la plage ± 10 mV ; 10 µV à pleine échelle pour la plage ± 100 mV ; 100 µV à pleine échelle pour la plage ± 1 V, Résolution de la tension : ± 10 mV : 1 µV à pleine échelle, ± 100 mV : 10 µV à pleine échelle, ± 1 V : 100 µV à pleine échelle, ± 10 V : 10 mV à pleine échelle
- Type RTD Capteur Pt 100/200/500/1000 Ω
- Échantillons, max 5M Échantillons, Intervalle 1 sec jusqu’à 1 semaine
- Type du capteur Thermocouple ; RTD ; thermistance
- ID de série OM-240-Logger
- Packages logiciels Intervalle de temps d'acquisition : Sélectionnable de 1 seconde jusqu'à 1 semaine (dépend du nombre de canaux acquis) Client FTP : Pour envoyer des données/alertes sur un serveur FTP (SFTP non pris en charge) MAIL pour envoyer des données/alertes : Jusqu'à 5 adresses courriel maximum (SMTPS / SSL non pris en charge) SMS pour envoyer des alertes : Jusqu'à 5 numéros de téléphone maximum Téléchargement des données : (mesures, journaux) au format .csv (compatible avec Microsoft Excel) Gestion des canaux virtuels : Pour les opérations mathématiques entre les canaux
- Température de stockage, max 85 °C
- Température de stockage, min -40 °C
- Approvisionnement Remarque 10 à 30 Vcc (protégé contre l’inversion de polarité), max 5A, Alimentation RTD : 1,2 mA, Alimentation Thermistance : 0,05 mA, 0,1 mA, 1,2 mA, Alimentation Tension : 5 V, 10 V, 20 V, 24 V CC*, Alimentation Courant : 10 V, 24 V CC*, Alimentation Pont de Wheatstone : ± 10 mV/V, Batteries rechargeables externes : 12 Vcc nominal, Alimentation Sortie commutée : La tension « V OUT » est commutée sous contrôle du programme. V OUT est l’alimentation d’entrée non régulée « V IN » (2 A max)
- Type d'approvisionnement électrique CC
- Tension d'alimentation 10 à 30 Vcc
- Précision de la température Thermocouple : K : ± 1,99 °C ; B : ± 1,22 °C ; J : ± 1,04 °C ; T : ± 1,99 °C ; E : ± 0,93 °C ; R : ± 1,64 °C ; N : ± 1,24 °C ; S : ± 1,64 °C ; RTD : 0,17 % ; Thermistance : -50 à 0 °C : ± 2 °C ; 0 à 150 °C : ± 1 °C
- Dérive du capteur de température < 10 ppm/°C, plage de -30 à 70°C
- Type de thermistance 3 000 Ω à 25 °C ; NTC
- Type de thermocouple J ; K ; T ; E ; N ; R ; S ; B
- Précision de tension 0,01 %, À bord : ± 1 %, Pont de Wheatstone : 0,01 %
- Plage de mesure de tension ± 10 mV ; ± 100 mV ; ± 1 V ; ± 10 V ; Pont de Wheatstone : ± 10 mV/V
- Poids 2.16 lb
- Largeur 5.43 in
OM-240 is a versatile, high accuracy “smart” data acquisition system. It provides 24 differential analog inputs, individually configured. The Data Logger can be used in a wide range of applications, including HVAC, oil and gas, water quality, energy and building monitoring. Using OM-240 requires no additional configuration/analysis software package, as it is provided by an Embedded Web Server. Only a standard Web Browser (Firefox recommended) for configurations and data view. Logged Data is ready to be shown in a graphic “real time” mode (License required) or exported in a CSV file. Channel expansion provided by multiplexers. There are 8 terminal blocks (each terminal block can handle up to 3 sensors). The OM-240 is designed to work with 2 to 6-wire sensors. You can connect 2-wire sensors on each channel and read 24 sensors, or 4-wire sensor and read 12 channels. The system will order sensors depending on how many wires they use, placing 6 wires sensors first, 4 wires in the middle, and 2 wires last.
Once software configuration is done, clicking on “Wiring scheme” button on the web interface near the sensors will show how to connect the chosen sensor to the block physically. It shows “relative” position, so if you start connecting sensors from the first, you will not have to leave “unused” positions (except for the ground connection of every block, if not used). Multiplexers are needed if the total “wires” from sensors exceeds the 48 provided by the OM-240.
Applications including Oil/Gas Pipeline Monitoring, Building/Bridge Structure Health Monitoring, Engine Thermal Mapping Testing, Data Center Environmental Monitoring, and Energy Farm Monitoring, and etc.
Once software configuration is done, clicking on “Wiring scheme” button on the web interface near the sensors will show how to connect the chosen sensor to the block physically. It shows “relative” position, so if you start connecting sensors from the first, you will not have to leave “unused” positions (except for the ground connection of every block, if not used). Multiplexers are needed if the total “wires” from sensors exceeds the 48 provided by the OM-240.
Applications including Oil/Gas Pipeline Monitoring, Building/Bridge Structure Health Monitoring, Engine Thermal Mapping Testing, Data Center Environmental Monitoring, and Energy Farm Monitoring, and etc.
PDF & Manuels
Accessoires
accessories
GS m/3G modem pour OM-240
C$640.69 / each
8 En stock
Afficher les évaluations et les avis
Rated 5 out of
5
by
Mr EJF from
My Honest Thoughts on a Beautifully Simple Logger
Super easy to configure, worked without any issues. Documentation is very clear and easy to follow.
Date published: 2026-01-07
Do the Expansion modules allow thermocouple readings?
Hi Ken, thank you for your question. Yes, the multiplexer allows thermocouple inputs.
Date published: 2020-04-08
This is a similar model with less channels as 8, 12, 16 or 20?
We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM
Date published: 2021-06-21
Is OM-240 compatible with Endress + Hauser TMR35?
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM
Date published: 2023-03-31
How many channels can you add to the base unit? I have a machine that is around 54. Adding the expansion unit would give me 48.
Thank you for your question .Expandable Up to 384 Channels with Multiplexers
Date published: 2021-11-22
Does the OM-240 work with PX51 model pressure transducers, or only PT100/200/500/1000?
Thank you for your question. The OM-240 will be suited for a variety of different sensors like the PX51 which has a dc voltage or current output.
Date published: 2021-10-19
How can the OM-240 be configured to display temperatures in °F instead of °C? If it can, please explain how this is done. I have been unable to convert Engineering Units from °C to °F.
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@dwyeromega.com
Date published: 2024-08-07
Can I acquire data from five analog sensors at one second interval (all sensors to be read at the same instant)? With one data sample consisting of time and readings from five sensors, how may data samples can be stored in the internal memory? Thanks
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM”
Date published: 2022-03-09
There is no GSM/GPRS modem available on the website, please guide to a store where it is available. thanks
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM”
Date published: 2022-03-09