SCE-LP

Supported Applications

The Omega SCE-LP series consists of NEMA Type 1 single-door electrical enclosures designed to house electrical controls, instruments, and components. These units are intended for use in areas that do not require oil, water, or dust-tight protection.

Operating Conditions & Performance

The SCE-LP series is rated as NEMA Type 1, UL Listed Type 1, CSA Type 1, and IEC 60529 IP 30. Construction utilizes carbon steel with spot weld assembly. Material thickness varies by enclosure width: enclosures less than 610 (24) wide are made of 1.5 (0.060) material, while enclosures 610 (24) wide and larger are made of 1.9 (0.075) material.

Overall dimensions for the series range as follows:

• Height: 6.00 to 36.00 inches
• Width: 6.00 to 30.00 inches
• Depth: 4.00 to 12.00 inches

Configuration Options

The series offers a broad range of sizes and mounting configurations to accommodate various internal component layouts.

• Housing Features: Single-door design with black quarter-turn latches and a ground stud on the door.
• Mounting Provisions: Includes standoffs provided for mounting optional panels, subpanel mounting hardware, and mounting holes in the back of the enclosure.
• Sizing Options: Available in multiple height, width, and depth combinations. Model numbers follow the format SCE-<HEIGHT><WIDTH><DEPTH>LP (example: SCE-6N604LP), where dimensions are specified in inches.

Key Product Differences

Variants within the SCE-LP series differ primarily by physical dimensions and depth options. The model number explicitly identifies these variations:

• Height Codes: Represented numerically in inches (e.g., 6, 8, 10 up to 36).
• Width Codes: Represented numerically in inches (e.g., 6, 8, 12 up to 30).
• Depth Options: Indicated by the final numeric digits before "LP" or "MP," corresponding to depths of 4.00, 6.00, 8.00, 10.00, and 12.00 inches.