Skip to search Skip to main content Skip to navigation

FMA6502ST

Mass Flow Controller w/RS485 Standard and Alarm Functions

Click and hold to zoom

Choose a Variant

Volumetric Flow Rate, Max

10 SCCM 20 SCCM 50 SCCM 100 SCCM 200 SCCM 500 SCCM 1 SLM 2 SLM 5 SLM 10 SLM 15 SLM 20 SLM 30 SLM 40 SCCM 50 SLM 60 SLM 80 SLM 100 SLM

See all Models See all accessories

$2,603.43 / each

Item# FMA6502ST

Added to Your Shopping Cart

In Stock

Lead Time (If not in stock): 7 weeks

+ Add to Project List

See Specs

Product Specs

<< See all Product Models

Brand
Accuracy	± 1 %
Accuracy Detail	Accuracy (including linearity): 15 to 25°C (59 to 77°F) and 0.7 to 4 bar (10 to 60 psia): ± 1% of FS, 0 to 50°C (32 to 122°F) and 0.3 to 10 bar (5 to 150 psia): ± 2% of FS, ± 1% of FS at a specific temperature and pressure with special calibration
Additional Features 1	2 SPDT 1A Relay
Calibration	NIST 10-Point Certificate
Circuit Protection	Reverse polarity, Current Limit, Resettable Fuse
Commodity Code	9032.89.6075
Control Valve	Solenoid Valve
Data Interface	RS485
Data Interface Note	RS485, standard; RS232, optional
DepthValue	11.7
Display Type	None
ECCN	EAR99
Electrical Connection	Sub-D Male Miniature Connector
Electrical Output	0 to 5 V
Enclosure Ratings	Inst. Level II/Poll. Degree II (IEC 60664)
GrossWeightValue	2.5
HeightUoM	IN
HeightValue	2.7
Leak Rate Under Vacuum	less than 10^⁻9 cc He/s
Materials, Wetted	316 Stainless Steel, 416 Stainless Steel, FKM
Measurement Pressure, Max	50 psi
Media Compatibility	Clean dry air / inert gas, HVAC / room air, Inert / non-reactive gases, Oxygen
NetWeightValue	2.5
OkForExport	true
Operating Pressure, Max	500 psi
Operating Pressure, Min	0 psi
Operating Temperature, Max	50 °C
Operating Temperature, Min	5 °C
Optimum Pressure	25 psi
Output Detail	Linear 0 to 5 Vdc (2000 Ω min load impedance); 0 to 10 Vdc (4000 Ω min impedance); 4 to 20 mA optional (0 to 500 Ω loop resistance)
Output Signal	Voltage
Pressure Coefficient	0.01% FS/psi
Pressure Drop, Max	1.06 psi
Process Connection Size	1/4 in
Process Connection Type	Compression Fitting
Repeatability	± 0.15%
Response Time	1 sec
Response Time Note	0.6 to 1.0 s to within ± 2% of setpoint over 20% to 100% FS
Supply Current	Up to 450 mA
Supply Voltage	± 15 Vdc
Taxonomy Level 1	SFD
Taxonomy Level 2	MF
Taxonomy Level 3	IL
Taxonomy Level 4	PO
Temperature Coefficient	0.05% FS/°C
Turndown Ratio	50:1
Volumetric Flow Rate, Max	10 SCCM
Volumetric Flow Rate, Min	0.2 SCCM
WeightUoM	LB
WidthValue	7.5
Country of Origin	United States
See All Specs Show Less