1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
HTS-HANI-CLAMP-P
Industrial Plastic Pipe Clamp HANI Temperature Sensor
Models In Stock
- Non-invasive temperature measurement
- Installation in seconds, no tools required
- Clamps to outside of pipe, measures fluid inside of pipe
- Accuracy comparable to an invasive sensor, ± 1.5 °C
HTS-HANI-CLAMP-P
From
$
965.66
Models In Stock
Product Overview
- Accuracy ± 1.5 °C (± 2.7 °F)
- Accuracy Detail ± 1.5°C from factory and improved accuracy possible with in-situation 1 or 2-point calibration
- Applications Aeronautics and Aerospace, Air and HVAC, Building and Maintenance, Chemicals, Clean Water and Purified Solutions, Energy Generation and Distribution, Fluid Measurement and Control, Food and Beverage, Fuel and Gas, General Purpose, Heat and Energy Systems, Hydraulic and Pneumatic Systems, Industrial and Manufacturing, Laboratories and Scientific, Materials and Surfaces, Medical, Office and Commercial, Oils, Pharmaceutical, Waste Management
- Base Mounting PVC, CPVC, PP, PFA
- Electrical Connection M12 8 pin Female
- Enclosure Ratings IP65
- Height 2.03 in
- Length 2.53 in
- Loop Resistance (Vsupply -8V)/0.24 A
- Materials Nylon, Silicone, Brass, Stainless Steel
- Media Compatibility Water, Water-based fluids
- Mounting Clamp
- Operating Temperature, Max 40 °C
- Operating Temperature, Min 0 °C
- Output Detail 4 to 20 mA User scalable analog output, default scaling 0-100°C
- Output Signal Current
- Process Temperature, Max 100 °C
- Process Temperature, Min 0 °C
- Response Time t63: 30 sec; t90: 60 sec
- Supply Power Note 8 VDC - 28 VDC (loop powered) Max Loop Resistance: Rmax (Ω)= (Vsupply -8V)/0.24 A
- Supply Voltage 8 to 28 Vdc
- Width 2.38 in
The Industrial Plastic Pipe Clamp HANI Temperature Sensor offers non-invasive temperature measurement with ±1.5 °C accuracy. It clamps easily to pipes without tools, requiring no cutting or downtime. Designed for water and water-based fluids, it features IP65 protection and fast response times (t63: 30 sec, t90: 60 sec). Ideal for industrial applications needing reliable, external fluid temperature monitoring.
Omega’s innovative clamp-on design makes sensor installation
easy. Unlike invasive sensors, the HANI Clamp Sensor mounts to the outside of
an sanitary metal pipe and measures the temperature of the process media inside
the pipe.
High Accuracy & Fast Response Times
Omega’s patent pending Hybrid Temperature Sensing platform
uses multiple sensors and a proprietary algorithm to achieve the same accuracy
and fast response times as state-of-the-art invasive sensors without the cost
and risk.. Accuracy for sanitary metal pipes: ± 0.5℃
Non-Invasive & Non-Contact Operation
No penetration, no risk of contamination. The HANI Clamp
Sensor never comes into contact with the process media flowing through the
pipe. There is no risk of buildup, sensor wear or breakage from high flow
rates, corrosive/abrasive liquids, wake frequency and water hammer.
Ensure you select the right sensor for your system
Industrial and sanitary pipes have different outer and inner
diameters, make sure you pick the correct sensor for your application. The HANI
Clamp Sensor is factory set for stainless steel sanitary pipes. To adjust to a
different type of metal please refer to the user’s manual.
PDFs & Manuals
Software & Drivers
