Alert: DwyerOmega offices and shipping warehouses will be closed for the holidays Dec. 24-26, 2025 and Jan 1-2, 2026
MMDWU001V10P3D0T1A1
0 to 1 psi, <0.1% Accuracy, Voltage, 0 to 10 V 1/4", NPT Female, Cable, 4 to 60 °C (40 to 140 °F)
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
|
| ADC Resolution | None |
| Accuracy | ± 0.08 % |
| Bandwidth | DC to 1 kHz |
| Burst Pressure | 1000 psi Maximum |
| Cable Length | 2 m |
| Commodity Code | 9026.20.0000 |
| Compensated Temperature, Max | 60 °C |
| Compensated Temperature, Min | 4 °C |
| ECCN | EAR99 |
| Electrical Connection | Cable |
| Electrical Output | 0 to 10 V |
| Enclosure Ratings | IP67 |
| Insulation Resistance | 100 MΩ @ 50 Vdc |
| Line/Static Pressure | 500 psi max applied to both sides simultaneously |
| Materials, Wetted | 316L Stainless Steel |
| Measurement Pressure Type | Differential |
| Measurement Pressure, Max | 1 psi |
| Measurement Pressure, Min | 0 psi |
| Media Compatibility | Any, Clean dry air / inert gas, Clean process / cooling water, Corrosive chemicals / acids / bases, Fuel gases, HVAC / room air, Hydraulic fluids, Inert / non-reactive gases, Liquids, Oils / lubricants, Organic solvents, Steam, Nitrogen, Non-corrosive Dry Gasses, Oil, Oxygen, Solvents, Steam, Water, Water-based fluids |
| Negative Side differentional compatable fluids or gasses | Same as positive side |
| OkForExport | true |
| Operating Temperature, Max | 121 °C |
| Operating Temperature, Min | -45 °C |
| Output Signal | Voltage |
| Positive Side differential wetted materials | 316L stainless steel |
| Pressure Cycles | 1 million, minimum |
| Process Connection Size | 1/4 in |
| Process Connection Type | NPT Female |
| Proof Pressure | 6x Full Scale up to 1000 psi |
| Proof Pressure Note | Positive Side |
| Response Time | <1 ms |
| Shock | 50 g, 11 ms half sine, vertical and horizontal axis |
| Stability | ± 0.1% |
| Stability Note | Long Term Stability (1-Year): ± 0.1% FS typical. |
| Supply Power Note | 15 to 30 Vdc @ 10 mA |
| Supply Voltage | 15 to 30 Vdc |
| Thermal Effect on Zero error, Max | ± 1% FS |
| Vibration | 5-2000-5 Hz, 30 minute cycle, Curve L, Mil-Spec 810 figure 514-2-2, vertical and horizontal axis |
| Weight | 200 g |
| See All Specs | |
PDFs & Manuals
Accessories
Show Ratings & Reviews
Rated 5 out of
5
by
Sally from
Transducer works as expected
Signal is stable. Was not clear to me from the data sheet, but the conduit option comes with prepped wire leads.
Date published: 2023-01-31