Need assistance? Call us: 1-800-663-4209
STAC6-S-220V
Choose a Variant
driver-current
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Additional Features 2 | 220 Vac, STAC6 Configurator |
| Amplifier Type | MOSFET, Dual H-Bridge, 4 Quadrant |
| Control Characteristics | Non-Volatile Storage: Configurations are stored in FLASH memory Step and Direction Inputs: Optically Isolated: 5 to 12V; minimum pulse width = 200 ns; maximum pulse frequency = 2 MHz Speed Range: Depends upon selected resolution; amplifier is suitable for speeds up to 133 rps Resolution: Software selectable from 200 to 51,200 steps/rev in increments of 1 step/rev Encoder Option: Differential line receivers suitable for 200 KHz or greater |
| Control Interfaces & Operating Modes | Step and Direction Inputs: Optically Isolated: 5 to 12V; minimum pulse width = 200 ns; maximum pulse frequency = 2 MHz; Digital Inputs: 7 Digital Inputs: Two 5V, Five 12 to 24 V; Digital Output: 3 Digital Outputs: 30V; Analog Inputs: 2 Analog Inputs: ±10V; Motor Regeneration: Built-in regeneration circuit (25 W max);Current Control: 4 state PWM at 20 KHz |
| Control Mode | Step and Direction, Velocity, Streaming Commands |
| Current Rating | 0.5 to 6.0 A in 0.01 A increments |
| Data Interface | RS232, RS485 |
| Driver Current | 0.5 to 3.2 A/Phase |
| GrossWeightValue | 2.56 |
| Input Voltage | 5 to 12 V |
| Motion Precision & Smoothness | Speed Range: Depends upon selected resolution; amplifier is suitable for speeds up to 133 rps |
| Number of Inputs | 7 |
| Number of Outputs | 3 |
| Operating Temperature, Max | 55 °C |
| Operating Temperature, Min | 0 °C |
| Process Connection | N/A |
| Protection | Over voltage, under voltage, over-temp, external output shorts (phase-to-phase, phase-to-ground), internal amplifier shorts |
| Relative Humidity | 90% non-condensing |
| Resolution | Software selectable from 200 to 51,200 steps/rev in increments of 1 step/rev |
| Series ID | STAC6-Srs-Stepper-Drives |
| Spec Sheet QR URL | https://www.dwyeromega.com/en-us/high-performance-stepper-drives-with-integrated-power-supply/STAC6-Srs-Stepper-Drives/p/STAC6-S-220V?guid=701a700000ulrduaaq&utm_source=spec-sheet&utm_medium=qr-code&utm_campaign=prd-sku-spec-sheet&utm_content=auto-generated-sku-level-spec-sheet |
| Supply Voltage | 94 to 265 Vac |
| driver-current | 0.5 to 3.2 A/Phase |
| Country of Origin | China |
| See All Specs | |
PDFs & Manuals
Software & Drivers
Show Ratings & Reviews