Need assistance? Call us: 1-800-663-4209
OMDC-MPU-A-Series
Geartooth Pickup Speed Sensor
- Senses Motion of Ferrous Gear Type Targets
- Zero Speed Sensing Capabilities
- Digital Output Signal (Square Wave)
- Large Operational Air Gap
OMDC-MPU-A-Series
From
$
324.58
Product Overview
- Additional Features 1 Square wave output
- Cable Length 1.8 m
- Current Sink, Max 20 mA
- Diameter 11.9 mm
- Electrical Connection Stripped Leads
- Housing Material Cylindrical Aluminium
- Length 25.4 mm
- Mounting Orientation Not Position Sensitive
- Operating Temperature, Max 125 °C
- Operating Temperature, Min -40 °C
- Series ID OMDC-MPU-A-Series
- Supply Voltage 4.5 to 24 Vdc
- Wire Gauge 22 AWG
Supported Applications
The Omega OMDC-MPU-A Series Geartooth Pickup Speed Sensor is a speed sensing solution designed for industrial automation and control applications. As part of the DwyerOmega portfolio under the Automation & Control | Controllers | Speed Controllers category, this series provides measurement capabilities where geartooth pickup technology is required.
Operating Conditions & Performance
The available documentation for the OMDC-MPU-A Series does not include specific performance specifications such as operating temperature ranges, accuracy ratings, response times, or environmental protection levels (IP/NEMA). Engineers should consult Omega directly or refer to the official product data sheet for detailed operational limits and performance characteristics.
Configuration Options
The series is represented by a single enabled variant in this bundle:
- Model Code: OMDC-MPU-A-Series (Leaf Model: OMDC-MPU-A)
- Original Part Number: OMDC-MPU-A
- Sensor Family: Speed Sensors
Detailed configuration options regarding housing styles, process connections, output signal types, or wetted materials are not present in the current data source.
Key Product Differences
The OMDC-MPU-A Series is identified specifically as a Geartooth Pickup Speed Sensor. No additional model families, sub-series distinctions, or alternative configurations within this series code are documented in the provided bundle.
Show Ratings & Reviews
Rated 5 out of
5
by
Dave Hx from
Good quality & easy to mount
Works perfect for our 20hp fan motor as an RPM sensor
Date published: 2022-03-22
What is the maximum air gap to the magnet for mounting this sensor?
Thank you for your question, There really isn’t a MAX spec on this because it depends on target size and material. In practice, set the sensor as close as possible and back away until optimal performance is achieved.
Date published: 2024-05-03
Whether the above sensor be interfaced with Arduino or Raspberry Pi?
Sorry, we have never tested this with Arduino or Raspberry Pi. This device generates a series of pulses proportional to the rate of rotation.
Date published: 2020-04-06