Need assistance? Call us: 1-800-663-4209
Gage-Pressure-Transducer
Gage Pressure
- Reliable gage pressure measurement with stable 4–20 mA output for process monitoring and control
- Stainless steel diaphragm with welded design and no O-rings for broad media compatibility
- Available in a range of pressure spans from low PSI up to higher industrial ranges
Gage-Pressure-Transducer
From
$
546.00
Product Overview
- Applications Boilers, Building and Maintenance, Commercial and Industrial, Environmental Monitoring, Flow Measurement, Fluid Measurement and Control, Industrial and Manufacturing, Pneumatic Systems, Process Automation and Control, R&D/Engineering Testing, Refrigeration Equipment
- Electrical Connection Packard Connector
- EMC Immunity Note 150 V/m
- Enclosure Material Aluminum with Silicone Gasket
- Fitting Torque 150 lb-in (16.95 Nm) Nominal
- Load Resistance 800 Ohms @ 24 VDC
- Materials, Wetted 304 Stainless Steel
- Operating Temperature, Max 257 °F
- Operating Temperature, Min -40 °F
- Output Signal 4 to 20 mA
- Measurement Pressure, Min 0 psi
- Measurement Pressure Type Gauge
- Process Connection Size 1/4 in
- Process Connection Type NPT Male
- Protection +/- 16 V over 5 minutes
- Relative Humidity 1 to 95% RH, non-condensing
- Response Time < 1 ms
- Series ID Gage-Pressure-Transducer
- Stability +/- 0.03% FS @ 0 PSIG; +/- 0.12% FS @ 1000 PSIG
- Storage Temperature, Max 176 °F
- Storage Temperature, Min -40 °F
- Supply Current 25 mA
- Supply Voltage 13 to 30 Vdc, 18 to 30 Vdc
- Thermal Effect on Span error, Max 15 to 60 psig: < +/- 1.0 FS
- Vibration 145 Hours
- Weight 0.3 lb
- Weight Note A/GP-NEMA 4 Series: 0.34 lbs. (0.15 kg) A/GP 6’ Harness: 0.20 lbs. (0.09 kg) A/GP 20’ Harness: 0.62 lbs. (0.28 kg) A/GP 2’ Harness: 0.06 lbs. (0.03 kg) A/GP 10’ Harness: 0.32 lbs. (0.14 kg) A/GP 30’ Harness: 0.92 lbs. (0.41 kg)
The ACI gage pressure transducer series delivers dependable pressure sensing for commercial, industrial, and process applications. These sensors use a bulk-micro machined stainless steel diaphragm with welded construction that avoids O-rings, enabling compatibility with a wide variety of gases and liquids compatible with 304L stainless steel. They produce a standard 4–20 mA output that integrates easily with controllers and data systems. You can choose models with protective NEMA 4 enclosures or add calibration certificates for precision needs. Typical applications include refrigeration systems, hydraulics, pumps, compressors, and general process control.
PDFs & Manuals
Show Ratings & Reviews
