Need assistance? Call us: 1-800-663-4209
Series-AUD
Floating Point to Analog Output for Control Applications
- Simplifies ECM switch calibration: The Trip Adjust Tool helps technicians set the trip point on ACI ECM current switches.
- Visual output indication: Provides a clear indication of output status during setup, reducing guesswork in the field.
- Distinguishes standby from running: Helps calibrate ECM current switches to identify true motor operation rather than low standby current.
- Ideal for HVAC commissioning: Useful for fan, pump, compressor, air handler, and furnace motor status applications.
- Service-friendly accessory: Speeds troubleshooting and verification during installation or maintenance.
Product Overview
- Accuracy Detail Output Signal Accuracy (24 VAC, 60 Hz): Absolute +/- 2% of span for adjustable ranges, 5% for preset; Output Signal Accuracy (24 VAC, 50 Hz): Absolute +/- 3% of span for adjustable ranges, 5% for preset
- Air Consumption 0 SCIM
- Applications Building and Maintenance, Electronic Equipment
- Approvals RoHS2, WEEE
- Contact Fail-Safe N/A
- Electrical Connection Screw Terminal
- Height 1.15 in
- Input Note Input Signal Source: Relay contact closure, transistor, or triac (24 VAC, 50/60 Hz); Input Signal Trigger Level: Normal Mode: 5 to 26.4 VDC, 24 to 26.4 VAC
- Input Range N/A
- Input Type Floating Point
- Length 3.75 in
- Materials PVC
- Operating Humidity 10 to 95% RH, non-condensing
- Operating Temperature, Max 120 °F
- Operating Temperature, Min 35 °F
- Output Configurations Rescalable
- Output Note Output Voltage Fixed Signal Ranges: 0 to 1 VDC, 0 to 4 VDC, 0 to 10 VDC, 0 to 13 VDC, 1 to 2 VDC, 1 to 5 VDC, 1 to 11 VDC, 1 to 14 VDC; Output Voltage Adjustable Signal Ranges: 0 to 20 VDC (with adjustable oset and span); Output Voltage Signal Load: 3300Ω minimum at 20 VDC ± 10% , 400 ohms minimum at 10 VDC ± 10% (If the voltage output is limited to 18 VDC on the high end of the output span, the DC supply limit can be 24 VDC –10% and maintain stated accuracy; Output Current Fixed Signal Ranges: 0 to 16 mA, 4 to 20 mA; Output Current Adjustable Signal Ranges: 0 to 20 mA (with adjustable oset and span); Output Current Signal Load: 0 to 750Ω maximum (If the load is lowered to 700Ω, the DC supply can be 24 VDC –10% and maintain stated accuracy
- Output Resistance N/A
- Resolution 256 steps (all ranges); 24 VDC (+/- 10%), 48 mA maximum
- Series ID Series-AUD
- Storage Temperature, Max 150 °F
- Storage Temperature, Min -20 °F
- Supply Current 208 mA
- Supply Voltage 24 Vac/Vdc
- Tightening Torque 0.5 Nm (Minimum); 0.6 Nm (Maximum)
- Weight 0.24 lb
- Width 2.2 in
- Wire Gauge 26 to 16 AWG
