06-912

SILO2 Oxygen analyzer with Solid State-Electrochemical Sensor, 0 to 25% range, 2 inch Tri-clamp connection, ±0.03% accuracy. SIL2-capable system designed for inertization in hazardous industrial environments.

Click and hold to zoom

Sensor Type

Solid State-Electrochemical

$7,116.00 / each

Item# 06-912

Added to Your Shopping Cart

In Stock

Lead Time (If not in stock): 5 weeks

Brand
Accuracy	± 0.01 %
Accuracy Detail	+/- 0.02 % @ 1 %, +/- 0.01 % @ 0.1 %
Cable Length	5 m
Calibration Interval	6 to 12 months
Connection Note	Intrinsically Safe Connection: Voltage Uo = 6 V DC Current intensity Io = 0.2 mA Power Po = 0.3 mW Max. outer inductivity Lo = 1000 mH Max. outer capacity Co = 10 μF
Control Output	Alarm
Data Interface	RS485
Display Type	LCD
Electrical Output	4 to 20 mA
Enclosure Material	PBT
Enclosure Ratings	IP20
Flow Rate Note	100 to 500 ml/min (250 ml/min optimal) in a vented atmosphere
Gas Measurement Range	0 to 25 %
Indicator Type	LCD and LED alerts on analyzer
Length	70 mm
Lifetime	up to 24 mo
Operating Humidity	0 to 95% RH, non-condensing
Operating Temperature, Max	50 °C
Operating Temperature, Min	-20 °C
Output Detail	Relay Contact Outputs RL1 / RL2 / Alarm: Switching power max.: 62.5 V A resp max. 30 W Switching voltage: Um 125 V AC/110 V DC Min. current 10 uA DC Min. voltage 10 mV DC According to IEC 947-5-1 resp. EN 60947 Transistor Output (DO): Switching parameters: < 28 V @ < 50 mA
Power Consumption	1.5 W
Process Connection Size	2 in
Process Connection Type	Tri-Clamp
Relay Output	1 A @ 30 Vdc, 0.5 A @ 125 Vac
Resolution	0.01%
Response Time	<20 seconds, typically 12 seconds
Sensitivity	0.02 % +/- 0.01
Sensor Type	Solid State-Electrochemical
Series ID	SIL2-capable-Oxygen-Analyzer
Shelf Life	12 months
Supply Power Type	DC
Supply Voltage	24 Vdc
Width	100 mm
Country of Origin	Ireland
See All Specs Show Less