1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
CL900-950
Built-In 5 Port Well Hot Point Dry Block Probe Calibrator
- Calibrates Thermocouples and RTD’s in Seconds
- Highly Accurate 0.9°C (1.5°F) & Exceptional Stability (0.3°F) for Precision Calibrations
- Completely Portable for Factory, Laboratory and Instrument Shops
- Interchangeable Test Wells and CL950 Built-In 5 Port Well Design Provides Customer Flexibility
Product Overview
- Accuracy ± 0.8 °C (± 1.5 °F)
- Accuracy Detail (1°F resolution) CL900 with 6" Test Well Inserts:±1.5°F ±1 LSD CL900 with 4" Test Well Inserts:±3°F ±1 LSD CL950: ±1.5°F, ±1 LSD
- Additional Features 1 Portable
- Control Microprocessor-based PID digital controller with data retention
- Data Interface N/A
- Height 300 mm
- Length 311 mm
- Operating Temperature, Max 38 °C
- Operating Temperature, Min 5 °C
- Power Consumption 1050 W
- Power Consumption Note 110 to 125 Vac, 50/60 Hz, 1050 W; 220 Vac, 50/60 Hz, 1050 W
- Process Temperature, Max 482 °C
- Process Temperature, Min 22 °C
- Process Temperature Note Temperature Uniformity (Within the Bottom 1" of the Test Well): CL900 with 6" Test Well Inserts: 0.3% CL900 with 4" Test Well Inserts: ±0.4% CL950: ± 0.3%
- Series ID CL900-950
- Temperature Stability ±0.3°F or better
- Weight 10.1 kg
- Well Type N/A
- Width 216 mm
OMEGA’s new hot point® calibrators allow calibration of thermocouple and RTD probes quickly and easily with accuracy to 0.9°C (1.5°F). An integral RTD sensor assures high measurement accuracy and repeatability. A built-in microprocessor-based PID digital controller assures exceptional stability. Setpoint and actual temperature are displayed simultaneously. Temperature can be set in one-degree increments from 22°C (40°F) above ambient to 482°C (900°F).
The CL900 calibrator accepts a variety of standard and metric optional inserts which are available in 4" and 6" depths and for probe diameters from 1/8" to 3/8". An undrilled insert is also available. The CL900 comes complete with a 1/4" diameter, 6" deep insert well and insert block tongs. Additional inserts can be ordered separately as required for other diameter probes. 6" depth inserts are used for probes 7" and longer; 4" depth inserts are used for probes 5" and longer.
The CL950 calibrator features a built-in well with 5 ports sized to accommodate a 1/16", 1/8", 3/16", and two 1/4" diameter probes. The multi-port design allows for the use of a calibrated or NIST-traceable probe and meter to be used as a standard while calibrating other probes. The 5 port design also allows for calibration of more than one probe at a time, and eliminates the need for separate insert wells.
The CL900 calibrator accepts a variety of standard and metric optional inserts which are available in 4" and 6" depths and for probe diameters from 1/8" to 3/8". An undrilled insert is also available. The CL900 comes complete with a 1/4" diameter, 6" deep insert well and insert block tongs. Additional inserts can be ordered separately as required for other diameter probes. 6" depth inserts are used for probes 7" and longer; 4" depth inserts are used for probes 5" and longer.
The CL950 calibrator features a built-in well with 5 ports sized to accommodate a 1/16", 1/8", 3/16", and two 1/4" diameter probes. The multi-port design allows for the use of a calibrated or NIST-traceable probe and meter to be used as a standard while calibrating other probes. The 5 port design also allows for calibration of more than one probe at a time, and eliminates the need for separate insert wells.
