Q5-B5-Series

BACnet MSTP, Smart Sensor, 3 SPDT Relays, NEMA 4X

(0)

Mechanical Rooms
Warehouses
Refrigeration Plants
Industrial Plants
Process Monitoring
Leak Detection
Parking Garages
Auto/ Truck Maintenance Facilities
Oil and Gas Industry

See Product Overview

Q5-B5-Series

From ^$ 99.00

Shop Models

More Variations Available

See all series options below

Data Sheet

Product Overview

Applications Access and Parking Control Systems, Air and HVAC, Building and Maintenance, Industrial and Manufacturing, Power Plants & Boilers, Refrigeration Equipment
Approvals RoHS, cETLus Listed, Safety requirement for Electrical Equipment for Measurement, Control & Laboratory Use Part 1: CAN/CSA-22.2 No. 61010-1 Third Edition, Dated May 11, 2012; General Requirements UL 61010-1 Third Edition, Dated May 11 2012 Q5C-CO & B5C-CO only: UL 2075 Gas & Vapor Detectors & Sensors (ETL Control# 4010204)
Baud Rate Note Q6 Communication Baud Rates (Q5): 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 76800 Bits/Second (Default: 4800)
Buzzer 80 dB at 3.94" (10 cm), 2700 Hz (3 Programmable Tones)
Cable Type Insulated Shielded
Calibration Note Factory Calibration Range: See Gas Sensor Selection & Specification Table on back of data sheet; Recommended Maintenance: Catalytic (Combustible): Accuracy & Bump test every 3 months or as required by Code Electrochemical (Toxic): Accuracy & Bump test every 6 months or as required by Code Oxygen/Hydrogen (Toxic): Calibrate every 3 months Infrared: Accuracy and Bump Test yearly
Conduit Connection 3/4 in Knockouts
Electrical Connection Screw Terminal
Electrical Life 200,000 operations minimum at rated load
Enclosure Material Note Plastic Enclosure; Polycarbonate Lexan; UL94 V-0, NEMA 4, 4X, 12 and 13 (IP66)
Enclosure Ratings IP66, NEMA Type 12, NEMA Type 13, NEMA Type 4, NEMA Type 4X, UL94 V-0
Fuse Rating 0.75 A Polyswitch
Keypad 3 Capacitive Touch sensing keys
LED Indicators Two Green LEDs (Tx/Rx Communication Status): Three LEDs (Relays 1, 2 & 3)
Mechanical Life 50 million operations
Operating Environment Indoor use only
Operating Humidity 5 to 95% RH, non-condensing
Operating Temperature, Max 122 °F
Operating Temperature, Min 32 °F
Output Detail Analog: 4-20 mA, 1 to 5 VDC or 2 to 10 VDC (All Analog Output Signals require 4-Wires)
Power Consumption 8.4 VA
Sensor Type Infrared
Series ID Q5-B5-Series
Service Life Electrochemical (Toxic): 2 to 3 Years, typical
Shelf Life 6 months
Storage Temperature, Max 68 °F
Storage Temperature, Min 32 °F
Supply Current 0.3 A
Tightening Torque 0.37 ft-lb (0.502 Nm) Nominal
Warm Up Time 24 Hours (Allow 24 hours before calibrating sensor after installation)
Weight 1 lb
Width 3.54 in
Wire Gauge 24 to 16 AWG