Need assistance? Call us: 1-800-663-4209
FOM-Series
-80 to 300 °C Fiber Optic Monitors
Models In Stock
- Temperature ranges from -80°C to 300°C
- Temperature monitors up to 8 channels
- Accuracy ± 1.0 °C (+/- 0.2 °C in relative temperature)
- Logging capabilities available through USB connectivity
FOM-Series
From
$
6,184.73
Models In Stock
Product Overview
- Accuracy ± 1 °C (± 1.8 °F)
- Accuracy Detail ± 1.0 °C (+/- 0.2 °C in relative temperature)
- Data Interface RS485, USB
- Data Interface Note RS-485 and USB output with Modbus
- Electrical Connection ST Connector
- Height 2.7 in
- Length 7.1 in
- Memory 2 TB
- Operating Temperature, Max 55 °C
- Operating Temperature, Min -40 °C
- Output Detail Optional external module (4-20 mA and 0-10 V, software selectable), with 8 programmable outputs
- Output Signal Current
- Portability Option Rechargeable battery (FOM-H201 version)
- Probe Compatibility All Omega fiber optic probes, most competitive GaAs probes
- Process Temperature, Max 300 °C
- Process Temperature, Min -80 °C
- Repeatability 0.2°C
- Resolution 0.1 °C
- Response Time, Max 0.5 sec
- Response Time, Min 0.2 sec
- Response Time Note Typically, 0.2 to 0.5 seconds per channel
- Series ID FOM-Series
- Supply Voltage 5 Vdc
- Width 4.9 in
Supported Applications
The Omega FOM-Series Fiber Optic Monitors are designed for precise temperature measurement in environments where non-electrical sensing is required. The series utilizes fiber optic technology to transfer information via light, ensuring the signal remains reliable and unaffected by external forces such as EMI, RFI, NMR, or microwave radiation.
Documented applications include:
- Transformer factories
- Chemical processing
- Medical equipment testing (MRI, PETSCAN, NMR)
- Commercial grade microwave heating
- Food and beverage processing
- Electric vehicle and battery testing
- Wood drying
Operating Conditions & Performance
The FOM-Series monitors operate within a process temperature range of -80 to 300°C (-112 to 572°F). The ambient operating temperature is specified as -40 ° to 55 °C, non-condensing. Accuracy for the series is ±1.0°C (1.8°F), with relative temperature accuracy noted as +/- 0.2°C.
Performance characteristics include a display resolution of 0.1°C and a response time typically ranging from 0.2 to 0.5 seconds per channel. The system supports up to eight channels, depending on the specific model configuration. Temperature units are displayed in °C only by default, with °F selectable via Omega Fiber Optic Sensing software.
Configuration Options
The series is available in two primary versions distinguished by power supply and portability:
- FOM-L201 Series: USB-powered units with dimensions of 4.9" x 7.1" x 2.7" (125 mm x 180 mm x 69 mm) and a weight of 450 g (15.8 oz).
- FOM-H201 Series: Includes a rechargeable battery for portability, with dimensions of 4.9" x 7.1" x 2.7" (125 mm x 180 mm x 69 mm) and a weight of 600 g (21.1 oz).
Connectivity options include an ST Connector for fiber optic probes, USB output with Modbus protocol support, and RS-485 communication. The system features a MicroSD external memory slot supporting cards up to 2 TB (card not included). Analog outputs are available via the optional FOM-AOUT accessory, providing configurable 0-10 V or 4-20 mA signals across eight programmable outputs.
The monitors comply with multiple standards including CE marking certification, FCC Part 15, IEC 61010-1 (2010) for the Low Voltage Directive, and environmental directives RoHS 2015/863/EU, WEEE 2012/19/EU, and REACH CE No 1907/2006. The enclosure rating is IP20.
Key Product Differences
Variants within the FOM-Series are differentiated by channel count (2 through 8) and power configuration. Model numbers follow the format FOM--, such as FOM-L201-6 for a 6-channel USB-powered monitor or FOM-H201-4 for a 4-channel battery-operated unit.
Key distinctions between versions include:
- FOM-L201 models: Designed for stationary use with USB power supply (5 VDC).
- FOM-H201 models: Equipped with a rechargeable battery to enable portable operation.
Both versions are compatible with all Omega fiber optic probes and most competitive GaAs probes. A case accessory is available for storage and transportation.
PDFs & Manuals
Software & Drivers
Show Ratings & Reviews
Rated 5 out of
5
by
Robert at rivian from
no calibration required, plug n play.
Took no more than 5 minutes to set it up.
probes are lot more robust than competitors
Date published: 2022-06-10
Rated 5 out of
5
by
Lisa from
Great FO Monitor, Highly Recommended
Accurate, nice quick and compact fibre optic temperature monitor which comes with plug and play installation and is very easy to install.
Date published: 2022-06-10
Are there any Labview drivers available for these models?
Hi Dave42,
Thank you for the inquiry. Unfortunately we do not offer Labview drivers for this product.
Best regards
OMEGA
Date published: 2022-11-18
How do I request calibration for cryogenic temperatures, and how much does the calibration cost?
Thank you for your inquiry. We believe the best assistance would come from speaking to us directly at 888-826-6342 ask for the Temperature Department Mon. – Fri. (HOURS 8:30AM - 5:30PM EST).
Date published: 2024-08-23
what is the real life of the Product & how accurate is it for Different types of sensing elements.
Thank you for your inquiry. Unfortunately we do not have any life cycle or time before failure data for these products. All sensor accessories have a ±0.8°C.
Date published: 2022-06-21
Can this monitor measure the temperature below -100 degree celcius if I use the Fiber Optic Temperature Sensor (Temperature ranges from -200°C to 250°C) provided by the Omega Company?
Hi zye044,
Thank you for the inquiry. This unit is limited to -80 C on the low end. This is the meters calibrated range on the low end.
Best regards
OMEGA
Date published: 2022-07-13