Need assistance? Call us: 1-800-663-4209
HDC19100-SERIES
321 Stainless Steel Cartridge Heater 0.13 in OD 1.25 to 4 in Long
Models In Stock
- Watt Densities of 60 W/in2 to 175 W/in2 Provide Maximum Process Temperature Flexibility
- Standard 321 Stainless Steel Sheath Material Provides High Temperature Strength, Good Thermal Conductivity and Resistance to Corrosion and Scaling
- Swaged Construction Provides Excellent Heat Transfer and High Dielectric Strength
- U.L. Component Recognized
HDC19100-SERIES
From
$
73.46
Models In Stock
Product Overview
- Series ID HDC19100-SERIES
Supported Applications
The Omega HDC19100 Series comprises cartridge heaters constructed with a Type 321 stainless steel sheath. These units are designed for insertion into drilled holes in metal blocks or molds to provide localized heating.
Operating Conditions & Performance
This series features a standard outer diameter of 0.13 inches and is available in lengths ranging from 1.25 to 4 inches. The sheath material for all variants in this bundle is Type 321 stainless steel.
Configuration Options
The HDC19100 Series offers a range of specific configurations identified by distinct part numbers within the enabled variant set:
- Dimensions: All listed variants maintain a 0.13 in OD with lengths spanning from 1.25 to 4 inches.
- Material: The sheath is specified as Type 321 stainless steel across the series.
Key Product Differences
The primary variation within this bundle is defined by length and specific part number assignment. Available SKUs include HDC00108, HDC00111, HDC02665, and the sequential range from HDC19100 through HDC19114.
Show Ratings & Reviews
Rated 5 out of
5
by
KenM from
Good quality
We use cartridges for heating metallic block. Works perfectly
Date published: 2024-04-21
Rated 5 out of
5
by
Halyna from
cartridge heater
Use two of them to heat a 100 cm3 metal cube. Reach 350°C within 10 minutes. Easy to work with.
Date published: 2024-01-08
Hello. These heaters are described as having “high dielectric strength”, but I cannot find a specific value for this. Can you please share the dielectric strength?
Thank you for your inquiry. Standard test is done at 500VDC.
Date published: 2023-09-12
Can we use this heater for a long time? For example, I'm planning to use it for one week to keep my vessel the 300 degrees Celsius.
The HDC Heaters are meant for continuous use and using one with the lowest Watt density to meet your requirements would theoretically last the longest.
Date published: 2021-07-20
Is the wire lead covering right next to the heater also able to withstand high temperatures of up to 600 C? I have purchased cartridge heaters before which seem to have some sort of plastic/rubber like coating.
Thank you for the inquiry. Leads are fiberglass insulated UL approved to 250 C.
Best regards
OMEGA
Date published: 2023-03-03
Hi I purchased both 75 watt and 150 watt heaters - 0250-0125-0075-N-10-1 AND ICH-0250-0125-0150-N-10-1. Why there is contact (75 - 250 M ohm) between the outside sheath and the heater connecting wires. They should be fully insulated.
Hi Ajay,
Yes, heater leads should be isolated from the sheath of the cartridge. Please forward this note to TEMP@OMEGA.COM.
Best regards
OMEGA
Date published: 2023-07-18