Need assistance? Call us: 1-800-663-4209
LDC00316
Low Density Cartridge Heater with 304 Stainless Steel Sheath 7/8 (22.22 mm) Nominal Diameter
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Actual Heater Diameter | 2 m |
| Additional Features 1 | Connector_Test |
| Additional Features 2 | Connector_Test |
| Amperage, Max | 15 A |
| Camber Tolerance | 0.254 mm per foot of length |
| Cartridge Length | 3.5 in |
| Diameter Tolerance | ± 0.002 in |
| Electrical Connection | JST BH Connector |
| GrossWeightValue | 0.23 |
| Heater Diameter | 0.875 in |
| Heater Power | 250 W |
| Lead Length | 10 in |
| Length Tolerance | 1.59 mm (± 1⁄16") up to 152 mm (6") long; 3.18 mm (± 1⁄8") over 152 mm (6") long |
| Operating Temperature, Max | 1200 °F |
| Operating Voltage, Max | 480 Vac, 480 V |
| Power Density | 31 W/in² |
| Power Density Note | 3.1 to 7.0 Watt/cm2 (20 to 45 Watt/in2) depending on heater size and operating temperature |
| Power Tolerance | +5%, -10% |
| Resistance Tolerance | +10%, -5% |
| Series ID | LDC7 |
| Sheath Material | 304 Stainless Steel |
| Spec Sheet QR URL | https://www.dwyeromega.com/en-us/304-stainless-steel-cartridge-heater-0-88-in-od-3-5-to-22-in-long/LDC7/p/LDC00316?guid=701a700000ulrduaaq&utm_source=spec-sheet&utm_medium=qr-code&utm_campaign=prd-sku-spec-sheet&utm_content=auto-generated-sku-level-spec-sheet |
| Supply Voltage | 120 Vac |
| heater-power | 250 W |
| See All Specs | |
PDFs & Manuals
Software & Drivers
Show Ratings & Reviews