1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
OME-DB-24POR-series
24-Channel Photo-MOS Relay Output Board - Panel Mount
- 24 Photo MOS Relays
- One (Optionally Isolated) 50-Pin Compatible Connector, One 37-Pin D-Sub Connector and One 20-Pin Connector
- Connects to OME Series of Data Acquisition Boards with Digtial Outputs
- LED Indicates Relay Status
OME-DB-24POR-series
From
$
813.60
Product Overview
- Additional Features 1 1.5 m 50-Pin Flat Cable
- Control Output Form A Photo MOS
- Height 130 mm
- Isolation 5000 Vac
- Number of Channels 24
- Off-Time 0.05 ms
- On-Time 0.7 ms
- Operating Temperature, Max 60 °C
- Operating Temperature, Min 0 °C
- Output Resistance 23 Ω
- Power Consumption +5 V @ 0.3 A
- Power Dissipation 500 mW
- Relative Humidity 5 to 90 % RH non-condensing
- Relay Current 0.13 A
- Storage Temperature, Max 70 °C
- Storage Temperature, Min -20 °C
- Supply Voltage 5 Vdc
- Switching Voltage 350 Vac
- Voltage Source 350 V (peak AC)
- Width 220 mm
The OME-DB-24POR includes 24 normally open, Form A, Photo MOS Relays. The board interfaces to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. The user can use the OME-DB-24POR to switch loads, up to 350 Vac and up to 0.13 A. The relay is energized by applying a 5 V signal to the appropriate relay channel on the 50-pin compatible connector, 37-pin D-Sub connector or 20-pin flat-pin connector. Twenty-four enunciator LED™s, one for each relay, light when their associated relay is activated.
PDFs & Manuals
