Need assistance? Call us: 1-800-663-4209
Series-ENC1
20 Gauge Metal Enclosure for Interfaces
Models In Stock
- Protects interface devices: The ENC1 20 gauge metal enclosure houses compatible ACI interface products in panels or equipment spaces.
- Durable metal construction: Helps protect electronics from incidental contact and jobsite wear.
- Cleaner control panel layout: Supports organized mounting of interface modules for easier service and troubleshooting.
- Ideal for retrofit projects: Useful when adding ACI interface devices to existing BAS or HVAC control installations.
- ACI accessory compatibility: Listed as an enclosure accessory for multiple ACI interface product families.
Series-ENC1
From
$
104.00
Models In Stock
Product Overview
- Approvals RoHS2, WEEE
- Compatibility Compatible With: AAR, ARM, ARM2, ATL, ATP, AUD, LPR, PTA, PTA2, PTP, PXP, PTS4, RTI & TOB; Not Compatible With: 6N1-ISO, AFP, AIM1, AIM2, AIM3, ASA, DMUX, DRN3.1, DRN4, EFP, EPC, EPW, MAO, MDO, Photon 4.1
- Finishing Light Gray Powder Coat
- Height 3.3 in
- Length 6.12 in
- Materials 20GA Metal
- Mounting Note Mounting Provisions (Base): Base has two 3/16” hole for mounting with screws or bolts; Mounting Provisions (Interface Product): Double faced tape for securing interface snap track in enclosure(There is an Adhesive foam Stop provided for holding interface in snaptrack)
- Operating Humidity 10 to 95% RH, non-condensing
- Operating Temperature, Max 120 °F
- Operating Temperature, Min 35 °F
- Series ID Series-ENC1
- Storage Temperature, Max 150 °F
- Storage Temperature, Min -20 °F
- Weight 1.125 lb
- Width 3.05 in
Supported Applications
The ACI Series ENC1 is a 20 gauge metal enclosure designed to hold ACI control interfaces or any small HVAC or Building Automation Control component. Documented applications include Interface Protective Housing and Protection for Small Building Automation Systems.
Operating Conditions & Performance
The series operates within an ambient temperature range of 35 to 120°F (1.7 to 48.9°C) and a relative humidity of 10 to 95% non-condensing. Storage conditions are specified as 20 to 150°F (-40 to 65.5°C). The enclosure features a light gray powder coat finish cured under high temperatures to seal all surfaces.
Physical Specifications
- Overall Dimensions: (L) 6.12" (155.45 mm) x (W) 3.05" (77.47 mm) x (H) 3.3" (83.82 mm)
- Weight: 1.125 lbs. (0.51 Kg)
Configuration Options
The Series ENC1 provides specific mounting and wiring provisions for control interfaces.
Mounting & Wiring Provisions
- Electrical Connections: Base has two 7/8" holes in the ends to accept ½" EMPT conduit fitting for control and power wiring. Snap-in covers are provided for all openings.
- Gauge Opening: Features a 2" diameter opening to view a potential gauge, with snap-in cover included.
- Base Mounting: Base has two 3/16" holes for mounting with screws or bolts.
- Interface Product Mounting: Double faced tape is provided for securing interface snap track in enclosure. An Adhesive foam Stop is provided for holding the interface in the snaptrack.
Key Product Differences
The series includes specific compatibility constraints regarding ACI control interfaces.
Compatibility List
- Compatible With: AAR, ARM, ARM2, ATL, ATP, AUD, LPR, PTA, PTA2, PTP, PXP, PTS4, RTI & TOB.
- Not Compatible With: 6N1-ISO, AFP, AIM1, AIM2, AIM3, ASA, DMUX, DRN3.1, DRN4, EFP, EPC, EPW, MAO, MDO, Photon 4.1.
The product carries RoHS2 and WEEE agency approvals and is covered by ACI's two (2) Year Limited Warranty.
