Need assistance? Call us: 1-800-663-4209
OSXL-TIM3-Series
-20 °C to 250 °C Handheld Thermal Imager, 32 x 31 IR Resolution
- Fully Automatic
- Focus Free
- Outstanding Measurement and Accuracy
- Compact and Lightweight
OSXL-TIM3-Series
From
$
2,767.84
Product Overview
- Additional Features 1 Thermal Imaging Camera, Focus free
- Alarm Yes
- Applications Air and HVAC, Building and Maintenance, Energy Generation and Distribution, Heat and Energy Systems, Insulation Inspection
- Data Interface USB
- Display Size 71 mm (2.8 in)
- Display Type Color LCD
- Emissivity, Max 1
- Emissivity, Min 0,1
- Emissivity Note 0.95 default; adjustable 0.1 to 1 step 0.1
- Enclosure Ratings IP54
- Frame Rate 9 Hz
- Height 233.68 mm
- Image Storage Stores up to 60,000 images/GB
- Infrared Accuracy ± 2%
- Infrared Accuracy Note (Tamb=20~26°C) ± 2% of reading, or 2°C (4°F)whichever is greater
- Infrared measurement, Max 250 °C
- Infrared measurement, Min -20 °C
- Length 94.65 mm
- Memory 8 GB
- Memory Note Supports 8G micro SD card (SD card included)
- Series ID OSXL-TIM3-Series
- Spectral Response, Max 14 µm
- Spectral Response, Min 8 µm
- Thermal Image Resolution 32 × 31
- Thermal Sensitivity 0.1 °C
- Weight 411 g
- Weight Note 411 g (14.5 oz) including batteries
- Width 74.03 mm
Supported Applications
The OSXL-TIM3-Series is a compact, fully automatic handheld thermal imaging camera that captures a thermal image and displays measured temperature on an on-board color LCD. Because it is focus-free and lightweight, it can be pointed at equipment and structures to visualize heat patterns quickly, then save images to a micro SD card and transfer them to the included software for report generation.
Typical inspection and diagnostic uses include:
- Factory automation and process control monitoring.
- Building and HVAC inspection.
- Solar power generation equipment checks.
- General electrical and mechanical fault-finding where surface heat signatures reveal problems.
Note: these products are not designed for use in, and should not be used for, human applications.
Operating Conditions & Performance
The camera measures infrared temperature across a range of −20 to 250 °C (−4 to 482 °F). Accuracy is ±2% of reading, or 2 °C (4 °F), whichever is greater, specified at a reference ambient of 26 °C (Tamb). Thermal sensitivity is 0.1 °C.
Core imaging and hardware characteristics include:
- Detector: a 32 x 31 thermopile array feeding a 32 x 31 thermal image resolution, with an 8 to 14 um sensor filter band.
- Frame rate: 9 Hz.
- Field of view: 40 x 40, with focus-free optics.
- Display: a 71 mm color LCD.
- Emissivity: 0.95 default, adjustable from 0.1 to 1.
- Storage: stores up to 60,000 images per GB in BMP format and supports an 8G micro SD card.
- Interface: USB output for transfer to the reporting software.
- Power: four AA 1.5 V batteries.
The enclosure carries an IP54 splash-proof rating and the product is CE marked. It measures 94.65 x 74.03 x 233.68 mm and weighs 411 grams including batteries.
Configuration Options
The series is supplied as a single configured model, so the capabilities described here define what the OSXL-TIM3 does rather than differences between separate hardware versions. Its configurable measurement behavior is set through the on-board menus and the desktop software:
- Emissivity control: a default of 0.95 with matt, semi-matt, semi-glossy, and glossy presets, plus a user-set value adjustable from 0.1 to 1.
- Alarm limits: selectable high alarm (HAL) and low alarm (LAL) thresholds.
- Software processing: framestack integration to reduce noise, interpolation to simulate higher resolution from the 32 x 31 array, and eight selectable color schemes for the false-color display.
- Output units: temperatures can be shown in Kelvin or degrees Celsius, with English or Chinese menus.
Key Product Differences
The series is ordered as a single model number:
- OSXL-TIM3 — handheld thermal imaging camera, supplied complete with operator's manual, hard carrying case, belt pouch, SD card, four AA batteries, and software on CD.
PDFs & Manuals
