1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
TXUN-HT-Hart-Tx
2-Wire Transmitter w/ Hart Protocol Enabled | 2 Analog Inputs
Models In Stock
TXUN-HT-Hart-Tx
From
$
994.75
Models In Stock
Product Overview
- Accuracy ± 0.05 %
- Accuracy Detail ≤ ±0.05% of span
- ADC Resolution 22 bit
- Additional Features 1 HART Protocol Revisions: HART 7 and HART 5
- Approvals "ATEX 2014/34/EU: KEMA 03ATEX1537 IECEx: KEM 10.0083X FM: FM17US0013X CSA: 1125003 INMETRO:NCC 12.0844 X EAC Ex TR-CU 012/2011: RU C-DK.GB08.V.00410 DNV-GL Marine: Stand. f. Certific. No. 2.4 SIL: Hardware assessed for use in SIL applications Authority Requirements: EMC: 2014/30/EU EAC: TR-CU 020/2011 "
- Cable Resistance 5 Ω
- Calibration Temperature, Max 28 °C
- Calibration Temperature, Min 20 °C
- Cold Junction Compensation Constant, internal or external via a Pt100 or Ni100 sensor
- DAC Resolution 16 bit
- Diameter 44 mm
- Drop 8 Vdc
- Electrical Connection Screw Terminal
- Electrical Output 4 to 20 mA
- EMC Standard NAMUR NE 21
- Enclosure Ratings IP00, IP68
- Height 20.2 mm
- Humidity Range Up to 95% non-condensing
- Input Control Signal -800 to 800 mV
- Input Resistance 10 MΩ
- Input Type Thermocouple, RTD, Resistance, Voltage
- Isolation 1.5 kVAC / 50 VAC
- Offset 50% of selected max. value
- Operating Temperature, Max 85 °C
- Operating Temperature, Min -40 °C
- Output Detail Min. Signal Range: 16 mA NAMUR NE43 Upscale/Downscale: 23 mA/3.5 mA
- Output Load ≤ (Vsupply - 8)/0.023 Ω
- Probe Length 0 mm
- Programmable Functions Loop Link and HART
- Response Time 1 to 60 sec
- RTD Type Pt50,Pt100,Pt200,Pt500,Pt1000,Ni50,Pt100,Pt120,Pt1000
- Sensor Break Detection 3.5 to 23 mA
- Sensor Current 0.2 mA
- Series ID TXUN-HT-Hart-Tx
- Sheath Material N/A
- Signal/Noise Ratio > 60 dB
- Supply Power Type DC
- Supply Voltage 8 to 30 Vdc
- Temperature Coefficient ≤ ±0.005%/°C
- Temperature Input Range N/A
- Thermocouple Type J, K, T, E, N, R, S, U, B, C, D, L, LR
- Update Rate, Max 440 ms
- Vibration IEC 60068-2-6;2 to 25 Hz: ±1.6 mm;25 to 100 Hz: ±4 g
- Weight 50 g
- Wiring/Connector Table 2-, 3-, or 4-Wire
Application
• Linearized temperature measurement with TC and RTD sensors e.g. Pt100 and Ni100.• HART communication and 4 to 20 mA analog PV output for individual, difference or average temperature measurement of up to two RTD or TC input sensors.
• Conversion of linear resistance to a standard analog current signal, e.g from valves or Ohmic level sensors.
• Amplification of bipolar mV signals to standard 4 to 20 mA current signals.
• Up to 63 transmitters (HART 7) can be connected in a multidrop communication setup.
Technical Characteristics
• HART protocol revision can be changed by user configuration to either HART 5 or HART 7 protocol.
• The HART 7 protocol offers:
• Long Tag numbers of up to 32 characters.
• Enhanced Burst Mode and Event notification with time stamping.
• Device variable and status mapping to any dynamic variable PV, SV, TV or QV.
• Process signal trend measurement with logs and summary data.
• Automatic event notification with time stamps.
• Command aggregation for higher communication efficiency.
• TXUN-HT is designed according to strict safety requirements and is therefore suitable for applications in SIL installations.
• Continuous check of vital stored data. Meeting the NAMUR NE 21 recommendations, the TXUN-HT HART transmitter ensures top measurement performance in harsh EMC environments. Additionally, the TXUN-HT meets NAMUR NE43 and NE89 recommendations.
Mounting/Installation
• For DIN form B sensor head mounting.
• Configuration via TXUN-KIT for standard set up or via HART programming unit for Hart Communication set up. See links in Notes.
PDFs & Manuals
Software & Drivers
Accessories
accessories
Show Ratings & Reviews