Need assistance? Call us: 1-800-663-4209
DP6000
1/8 DIN Dual Input Process Panel Meter, 6 Digit Display
Models In Stock
- Modular USB, RS232, RS485 Serial Communication Options and Relays
- 0 to 20 mA, 4 to 20 mA, 0 to 5V, 1 to 5V, and ±10V Inputs
- NEMA 4X (IP65) Front
- Universal 85 to 265 Vac or 12/24 Vdc Input Power
DP6000
From
$
880.24
Models In Stock
Product Overview
- Baud Rate 300 to 19200
- Calibration Calibrated at the factory. Recalibration is recommended at least every 12 months
- Category of Overvoltage II
- Category of Overvoltage Note Installation overvoltage category II; local level with smaller transient overvoltages than installation overvoltage category III
- Data Interface Modbus RTU
- Data Interface Note Protocol: Modbus RTU Meter Address/Slave ID: 1 – 247 Baud Rate: 300 to 19,200 bps Transmit Time Delay: Programmable between 0 and 199 ms Data: 8 bit (1 start bit, 1 or 2 stop bits) Parity: Even, odd, or none with 1 or 2 stop bits Byte-to-Byte Timeout: 0.01 to 2.54 seconds Turn Around Delay: Less than 2 ms (fixed)
- Digital I/O Note Channels: 4 digital inputs and 4 digital outputs per module System: Up to 2 modules for a total of 8 inputs and 8 outputs Digital Input Logic: High: 3 to 5 Vdc Low: 0 to 1.25 Vdc Digital Output Logic: High: 3.1 to 3.3 Vdc Low: 0 to 0.4 Vdc Source Current: 10 mA maximum Sink Current: 1.5 mA minimum +5 V Terminal: To be used as pull-up for digital inputs only
- Display Color Red
- Display Size 15 mm (0.60 in)
- Electrical Connection Screw Terminal
- Electrical Connection Note Removable screw terminal blocks accept 12 to 22 AWG wire, RJ45 for external relays, digital I/o, and serial communication adaptors
- Enclosure Material Plastic
- Enclosure Ratings IP65, NEMA Type 4X
- Form factor 1/8 DIN
- Functions Noise Filter: Programmable from 2 to 199 (0 will disable filter) ;Filter Bypass: Programmable from 0.1 to 99.9% of calibrated span ;Cyber Security: 3 programmable passwords restrict modification of programmed settings; Pass 1: Allows use of function keys and digital inputs; Pass 2: Allows use of function keys, digital inputs and editing set/ reset points; Pass 3: Restricts all programming, function keys, and digital inputs
- Fuse Rating 5 A delayed
- Height 62 mm
- Input Type Note Input: Field selectable: 0 to 20 mA, 4 to 20 mA, ±10 Vdc (0 to 5, 1 to 5, 0 to 10V), MoDbuS PV (slave) Accuracy: ±0.03% of calibrated span ±1 count, square root and programmable exponent accuracy range: 10 to 100% of calibrated span Temperature Drift: 0.005% of calibrated span/°C max from 0 to 65°C ambient, 0.01% of calibrated span/°C max from -40 to 0°C ambient Signal Input Conditioning Function: Linear, square root, programmable exponent, or round horizontal tank volume calculation Multi-Point Linearization: 2 to 32 points for PV or PV1; 2 to 8 points for PV2 (dual-scale level feature) Programmable Exponent: 1.0001 to 2.9999 Low-Flow Cutoff: 0 to 999999 (0 disables cutoff function) Decimal Point: Up to 5 decimal places or none: d.ddddd, dd.dddd, ddd.ddd, dddd.dd, ddddd.d, or dddddd Calibration Range: 4 to 20 mA: Minimum span; input 1 and Input 2: 0.15 mA ±10 V: Minimum span; input 1 and 2: 0.10 V An Error message will appear if input 1 and input 2 signals are too close together Input Impedance: Voltage Ranges: Greater than 1 MΩ Current Ranges: 50 to 100 Ω (depending on resettable fuse impedance) Input Overload: Current input protected by resettable fuse, 30 Vdc max; fuse resets automatically after fault is removed
- Isolation 4 kV input/output-to-power line; 500 V input-to-output or output-to-P+ supply
- Length 143 mm
- Memory Non-Volatile Memory : All programmed settings are stored in non-volatile memory for a minimum of ten years if power is lost
- Mounting 1/8 DIN panel cutout required: 92 x 45 mm (3.622 x 1.772"); two panel mounting bracket assemblies are provided
- Normal Mode Rejection Greater than 60 db at 50/60 Hz
- Operating Temperature, Max 65 °C
- Operating Temperature, Min -40 °C
- Programmable Functions Filter Bypass, Noise Filter, Security
- Programming 4 front panel buttons, digital inputs, PC and software, Modbus registers, or cloning using copy function
- Relative Humidity 0 to 90% non-condensing
- Sampling Rate 5 Hz (5 updates/second)
- Series ID DP6000
- Storage Temperature, Max 85 °C
- Storage Temperature, Min -40 °C
- Supply Power Note 85 to 265 Vac 50/60 Hz, 90 to 265 Vdc, 20 W max, or jumper selectable 12/24 Vdc ±10%, 15 W max Isolated Transmitter Power Supply: 24 Vdc ±5% @ 200 mA max (standard), (12/24 Vdc powered models rated @ 100 mA max); 5 or 10 Vdc @ 50 mA max, selectable with internal jumper J4
- Tightening Torque Screw terminal connectors: 5 lb-in
- Weight 269 g
- Width 119 mm
- Wire Gauge 22 to 12 AWG
Supported Applications
The Omega DP6000 Series is a 1/8 DIN dual-input process panel meter designed for industrial monitoring and control. The series supports field-selectable inputs including DC current (0 to 20 mA, 4 to 20 mA), DC voltage (±10 Vdc, with ranges of 0 to 5 V, 1 to 5 V, 0 to 10 V), and MODBUS PV (slave). It is intended for applications requiring the display of process variables (PV), maximum/minimum values, set points, manual control settings, or MODBUS inputs. The meter accommodates signal conditioning functions such as linear scaling, square root extraction, programmable exponents, and round horizontal tank volume calculations.
Operating Conditions & Performance
The DP6000 operates within an ambient temperature range of -40 to 65°C (-40 to 149°F) with a storage temperature capability from -40 to 85°C (-40 to 185°F). It functions in relative humidity up to 90% non-condensing. The enclosure is rated NEMA 4X (IP65), constructed of high-impact plastic, and features a dual-line display with red LEDs: the upper display measures 15 mm (0.60") high and the lower display 12 mm (0.46") high.
Performance specifications include an input accuracy of ±0.03% of calibrated span ±1 count, applicable to linear, square root, or programmable exponent ranges from 10 to 100% of calibrated span. The isolated 4-20 mA transmitter output offers an accuracy of ±0.1% of span ±0.004 mA. Display updates occur at a rate of 5/second (200 ms). Input impedance is greater than 1 MΩ for voltage ranges and 50 to 100 Ω for current ranges.
Electrical & Safety Ratings
- Power Supply: Universal 85 to 265 Vac (50/60 Hz), 90 to 265 Vdc, or jumper-selectable 12/24 Vdc ±10%.
- Isolation: 4 kV input/output-to-power line; 500 V input-to-output or output-to-P+ supply.
- Overvoltage Category: Installation overvoltage category II (local level with smaller transient overvoltages than installation overvoltage category III).
Configuration Options
The series offers configurable output and communication options to meet specific control needs. Internal relay configurations include 2 or 4 SPDT (Form C) relays, rated at 3 A @ 30 Vdc and 125/250 Vac resistive load; for inductive loads such as contactors and solenoids, the rating is 1/14 HP (= 50 W) @ 125/250 Vac. An isolated 4-20 mA transmitter output is available with a selectable scaling range of 1.000 to 23.000 mA.
Relay & Control Features
- Operation Modes: Automatic (non-latching), latching, sampling, pump alternation control (for 2 to 8 relays), and off/interlock modes.
- Alarm Configuration: User-programmable high or low trip points with deadband from 0 to 100% of span. Time delays are programmable independently for each relay from 0 to 999.9 seconds.
- Fail-Safe Operation: Programmable and independent per relay; in the event of power failure, relays transition to an alarm state (relay coil energized in non-alarm condition).
Communication & Expansion
The meter supports MODBUS RTU serial communications with baud rates from 300 to 19,200 bps. Field-installable expansion modules and adaptors extend functionality:
- Digital I/O: DPA1044 module provides 4 digital inputs and 4 digital outputs (up to 8 of each with two modules).
- Relay Expansion: DPA1004 adds 4 Form A (SPST) relays.
- Serial Adaptors: Options include RS232, RS485, USB serial adaptors, and isolated/non-isolated converters for RS232 to RS422/485 or USB to RS422/485.
Key Product Differences
The DP6000 series includes distinct model families identified by the prefix: DP6000, DP6060, and DP6070. Model numbers follow a structure indicating voltage type, output configuration, and relay count (e.g., DP6000-6R2 for 2 relays; DP6000-6H3 for 4 to 20 mA output). Variants are available with no outputs (-R0/-H0), internal relays only (-R2, -R4), analog current output only (-R3, -H3), or combinations of both.
Specific model distinctions include:
- -6 Series (e.g., DP6000-6R2): Standard process panel meter configurations with 1/8 DIN mounting and standard display intensity levels.
- -7 Series (e.g., DP6000-7H3): Variants often associated with sunlight-readable models or specific housing options, maintaining the same input/output architecture as the -6 series but differentiated by model code suffixes in ordering tables.
- Housing & Mounting: All variants require a 1/8 DIN panel cutout of 92 x 45 mm (3.622 x 1.772"). The enclosure is black high-impact plastic with overall dimensions of 119 W x 62 H x 143 mm D.
