DwyerOmega

A battery powered, stand alone pH and temperature data logger with an LCD Display with RTD compensation. Connects to commonly used pH, ORP and ISE electrodes.

OM-CP-WIND101A-KIT is a complete system to accurately measure and record wind speed. Complete with data logger, weatherproof enclosure, three-cup anemometer and all cabling.

The HFS-DAQ accepts 8 differential input channels of both heat flux and temperature from 4 HFS sensors. Free PC software and USB interface. High accuracy.

OM-EL-USB-CO Series standalone USB data loggers measure and store 32,510 carbon monoxide (CO) readings from 0 to 1000 ppm or 0 to 300 ppm from -10 to 40°C (14 to 104°F).

The OME-DB-24C - 24 optically isolated digital output channels in four isolated banks. Features darlington transistor and integral suppression diode for inductive loads.

The OME-DB-24R consists of 24 form C, electromechanical relays for efficient switching of load by programmed control. Relay contacts control 0.5 A /110 V or 1 A/24 Vdc loads.

The OME-DB-24PR 24-Channel power relay output board consists of 8 form C and 16 form A electromechanical relays for efficient switching of loads by programmed control. 

OM-CP-LF101A-KIT data logging system accurately measures and records leaf wetness. Ideal for plant disease forecasting, irrigation studies and monitoring frost cycles.

The OM-CP-MOTOR101A Series measures and records on and off status changes for motors or other equipment drawing up to 200 Amps.

The OME-DB-24PD Optically isolates digital input channels. Connects directly to OME-PIO-D144 board. AC/DC Signal Input with filter, input buffer, and voltage comparator.

The OM-CP-PRT110 is a differential pressure and temperature data logger ideal for use in factory and laboratory applications that records 10,922 measurements per channel.