OM-CP-PHTEMP2000-Logger

pH and Temperature Data Logger with LCD Display

Works with OMEGA™ PHE-4200 Series of pH Probes
Real-Time Operation
Programmable Engineering Units
NIST Traceable Calibration

See Product Overview

From ^€ 817,36

Shop Models

1 Variations available

See all series options below

Data Sheet

Product Overview

Accuracy Detail pH: ±0.01 pH,ORP/ISE:±0.1 mV,Temperature Calibrated Accuracy: ±0.15°C ,@ 25°C ambient (±0.015 Ω); pH EMI Susceptibility: <0.2 pH @ 3V/M, 80 MHz to 1 GHz; ORP/ISE Susceptibility: <10 mV @ 3V/M, 80 MHz to 1 GHz
Battery life 1 yr, typical with reading interval of 1 min
Battery Size and Type Alkaline 9V
Baud Rate 115200
Calibration Digital calibration through software
Data Interface USB
Display Note LCD Dimensions: 1.375" x 2.5" Backlight: Configurable w/auto shut-off and contrast adjustment
Display Type LCD
Electrical Connection Note Temperature: Removable screw terminal, pH: Female BNC
Height 1.25 in
Impedance Input 1012 Ω
Indicator Type Power, Status, Memory
Length 3.3 in
Materials Aluminum
Measurement Type Temperature, pH/ORP/ISE
Memory 131,071 readings
Memory Note 131,071 readings per channel
Number of Measurements 2
Operating Temperature, Max 50 °C
Operating Temperature, Min -5 °C
PH Measurement Range -2 to 16 pH
Real Time Recording The device may be used with PC to monitor and record data in Real-time
Relative Humidity 0 to 95% RH non-condensing
Resolution Temperature: 0.01°C, Measurement: 0.01 pH
Sampling Rate 2 Hz (2 updates/second)
Sampling Rate Note 1 Reading every 2 Seconds to 1 Every 24 Hours
Sensor Type pH, RTD
Software XP SP3/Vista/7 and 8
Start Modes Delayed Start, Immediate Start
Supply Power Type Battery
Temperature Measurement Range -40 to 110 °C
Time Accuracy ±1 minute/month (at 25°C; RS232 cable not in use)
USB Cable Length 6 ft
Weight 440 g
Width 4.8 in
Wire Code Option 2 -, 3 - , 4- Wire

The OM-CP-PHTEMP2000 is a battery powered, stand alone pH and temperature data logger with an LCD. The OM-CP-PHTEMP2000 will directly connect to many commonly used pH, ORP and ISE electrodes through a female BNC connector mounted on its side. Temperature compensation is done automatically by connecting an RTD to the unit.
The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged. The OM-CP-PHTEMP2000 makes data retrieval quick and easy. Simply plug it into an empty com port and our user-friendly software does the rest.

PDFs & Manuals

OM-CP-PHTEMP2000-Series_spec OM-CP-PHTEMP2000-Logger View More

View Less

Software & Drivers

OM_CP_4_3_1_0_ZIP View More

View Less

Compliance