United Kingdom 0800 488 488 | Intl +44 (0) 161 777 6611 | Welcome to our new website, found an issue or bug? Please report it here
OM-CP-RFCurrent2000A-Series
Wireless Current Data Logger with Display
- Wireless Two-Way Communications
- 20 mA, 160 mA, or 3 A Measurement Ranges
- Digital Display Provides Instant Access to Current Readings and Statistics
- Readings Displayed in User Selected Measurement Unit
OM-CP-RFCurrent2000A-Series
From
£
384.06
Product Overview
- Alarm Note User configurable audible, on-screen, email and text (SMS) alarms, Alarm Delay: A cumulative alarm delay may be set in which the device will activate the alarm (via LED) only when the device has recorded a user specified time duration of data, Audible Alarm Functionality: 1 beep per second for reading alarm above/below threshold
- Band Frequency 2.405 to 2.475 GHz
- Band Frequency Note ISM band 2.405 to 2.475 GHz operation (channels 11 through 25) @ 250 kbps data rate
- Battery life 4 yr, typical with reading interval of 15 min
- Battery Size and Type Li-ion, 9V
- Baud Rate 250000
- Calibration Digital Calibration through Software
- Calibration Date Automated
- Configuration Omega Engineering Data Recording Software, Windows PC
- Conversion Time 150 milliseconds
- Current Resolution 0.01 mA
- Data Interface Wireless, USB
- Data Interface Note USB to mini USB, 250,000 baud for standalone operation or OM-CP-RFC1000-EXT/ OM-CP-RFC1000-EXT-EUR/OM-CP-RFC1000-IP69K required for wireless operation
- Display Type LCD
- Frequency Rejection 50 to 60 Hz
- Height 0.95 in
- Input Type External
- LED Functionality Green LED blinks every 5 seconds to indicate unit is logging, Blue LED blinks every 15 seconds to indicate unit is in wireless mode, Red LED blinks every 1 second to indicate alarm condition
- Length 3.5 in
- Materials Plastic
- Measurement Type Current
- Memory Modes Yes
- Number of Measurements 1
- Operating Temperature, Max 60 °C
- Operating Temperature, Min -20 °C
- Real Time Recording The device may be used with PC to monitor and record data in real-time
- Relative Humidity 0 to 95% RH non-condensing
- Response Time Current: 0.15 sec
- Response Time Note Current: 0.15 seconds at sensor
- RF Frequency 2.45 GHz
- RF Frequency Note 2.45GHz IEEE 802.15.4 ultra-low power wireless transceiver with fully bi-directional communication
- Samples,Max 32256 Samples, Interval Selectable 1 Sec to 24 hrs
- Sensor Type Current Sensor
- Series ID OM-CP-RFCurrent2000A-Series
- Software XP SP3/Vista/7 and 8 (32 and 64-bit)
- Start Modes Delayed Start, Immediate Start
- Stop Modes Manual via remote software connection, At set date and time, At set Duration
- Supply Power Note Max Voltage Between Inputs to Ground: 2.5 V
- Supply Power Type Battery
- Temperature Coefficient < ± 50 ppm/°C typical
- Time Accuracy ± 1 minute/month
- Weight 4.1 oz
- Width 3.3 in
Supported Applications
The Omega OM-CP-RFCurrent2000A-Series is a Wireless Current Data Logger with Display designed to measure and record data at user-specified intervals. The series supports reading rates ranging from once every 2 seconds to once every 12 hours.
Data recording software allows users to select reading rates, specify user IDs, and initiate data collection without programming skills. Recorded data can be saved in formats compatible with spreadsheet applications like Microsoft Excel or Lotus 1-2-3.
Operating Conditions & Performance
The series operates within an ambient temperature range of -40°C to +80°C and a humidity rating of 5% to 95% RH. The product line is ISO 9001 Certified and ISO 9002 Certified.
Most Omega Engineering data loggers in this family contain a lithium battery. Users must not cut the battery open, incinerate, or recharge it. Lithium batteries should not be heated above 85 °C unless specifically rated for higher temperatures. These products are not designed for use in, and should not be used for, patient-connected applications.
Configuration Options
The series is available with specific current measurement configurations identified by the following model numbers:
- OM-CP-RFCURRENT2000A-160MA
- OM-CP-RFCURRENT2000A-20MA
- OM-CP-RFCURRENT2000A-3A
Data transfer and configuration are supported via the OM-CP-IFC110 interface cable, which features a male jack connector and female DB 9-pin connector. The logger connects to a host computer using an available 9 pin male serial (COM) port.
System Requirements
The data recording software requires the following system specifications:
- Processor: Pentium or higher
- Operating System: Windows 95/98/2000/XP/NT
- RAM: 128 MB
- Monitor: Color 800 X 600
- Disk Space: 30 MB free
- Drive: 3.5" disk drive or CD-ROM
- Serial Port: Available 9 pin male serial (COM) port
The devices are made in the USA and come with a 5-year warranty.
Key Product Differences
Variants within the OM-CP-RFCurrent2000A-Series differ by their specific current measurement range, as indicated by the model suffix (160MA, 20MA, or 3A). The series title identifies these units as Wireless Current Data Loggers with Display.
PDFs & Manuals
Software & Drivers
