United Kingdom 0800 488 488 | Intl +44 (0) 161 777 6611 | Welcome to our new website, found an issue or bug? Please report it here
SPRTX-STCTX-Srs-Sig-Cond
Universal Temperature Connector Transmitter for TC and RTDs
- High Accuracy, Repeatability and Stability
- Connector Design Converts Input Signal to a Standard 2-Wire, 4 to 20 mA Output
- Provides “Open Sensor Wire” Signal Indication
- Easy Interface, Just plug into the Connector-Transmitter™
SPRTX-STCTX-Srs-Sig-Cond
From
£
114.95
Product Overview
- Accuracy ± 0.5 %
- Approvals CE
- Cable Length 3 m
- Electrical Connection Cable
- Electrical Output 4 to 20 mA, 1 to 5 Vdc
- Load Resistance (Vsupply – 9V)/0.02 A
- Loop Resistance, Max (Vs – 9V) / 0.020 A
- Operating Temperature, Max 85 °C
- Operating Temperature, Min -40 °C
- Output Signal Current
- Sensor Break Detection Leg 1: Open = 27 mA, Leg 2: Open = 2.2 mA, Leg 3: Open = 2.2 Ma
- Series ID SPRTX-STCTX-Srs-Sig-Cond
- Supply Power 9 to 24 Vdc @ 30 mA max
- Supply Power Type DC
The OMEGATM SPRTX and STCTX Series are high performance, low cost, industrial RTD (Resistive Temperature Device) and Thermocouple Connector-Transmitters. Both feature a encapsulated micro miniature signal conditioner built into a patented connector housing. The SPRTX signal conditioner converts the resistive change of a 100 Ω, 0.00385 RTD sensor or probe across a dedicated temperature range into an industry standard 2-wire, 4 to 20 mA analog output. The STCTX signal conditioner converts the non-linear millivolt output of a thermocouple sensor or ungrounded probe across a dedicated temperature range into an industry standard 2-wire, 4 to 20 mA analog output. This analog output can be sent hundreds of feet away from the location of your sensor (probe) to an indicating device, controller, PLC, computer, data logger or chart recorder.
