United Kingdom 0800 488 488 | Intl +44 (0) 161 777 6611 | Welcome to our new website, found an issue or bug? Please report it here
OM-CP-STATE101A-Logger
State Data Logger, Part of the NOMAD® Family
Models In Stock
- Interfaces to Contact Closures or TTL Inputs up to 30V
- 10 Year Battery Life
- 4 Hz Second Reading Rate
- Multiple Start/Stop Function
OM-CP-STATE101A-Logger
From
£
116.72
Models In Stock
Product Overview
- Accuracy ± 1 min/month
- Accuracy Detail ±1 minute/month at 20°C, stand alone data logging
- Battery life up to 10 yr
- Battery Size and Type 3.6V Li-ion
- Baud Rate 115200
- Data Interface USB
- Display Measuring Units °C, °F, ft/min, k/h, kts, m/s, mph
- Electrical Connection Removable Screw Terminal
- Height 1.4 in
- Impedance Input >60 kΩ
- Internal Weak Pull-Up <60 μA
- LED Indicators Green LED Blinks: 10 second rate to indicate logging; 15 second rate to indicate delay start mode;Red LED Blinks: 10 second rate to indicate low battery and/or full memory
- Length 0.6 in
- Materials ABS, Aluminum
- Memory 406,323 readings; software configurable memory wrap
- Memory Modes Yes
- Multi Start/Stop Mode Note To Start the Device:Press and hold the pushbutton for 5 seconds, the green LED will flash during this time. The device has started logging To Stop the Device:Press and hold the pushbutton for 5 seconds, the red LED will flash for 3 seconds and then the green LED will flash for two seconds. The device has stopped logging
- Number of Measurements 1
- Operating Temperature, Max 80 °C
- Operating Temperature, Min -40 °C
- Protection An optional password may be programmed into the device to restrict access to configuration options. Data may be read out without the password.
- Real Time Recording The device may be used with PC to monitor and record data in real-time
- Relative Humidity 0 to 95% RH non-condensing
- Resolution 4 Hz
- Samples,Max 0.25 sec
- Sampling Rate 4 Hz (4 updates/second)
- Series ID OM-CP-STATE101A-Logger
- Software XP SP3/Vista/7 and 8 (32 and 64-bit)
- Start Modes Delayed Start, Immediate Start, Push-button
- Supply Power Type Battery
- Voltage Input Range 0 to 30 vdc
- Weight 0.9 oz
- Width 2.2 in
Supported Applications
The Omega OM-CP-STATE101A is a state data logger from the NOMAD® family designed to interface with contact closures or TTL inputs up to 30V. The device senses input transitions and records the time and state, storing data in non-volatile solid-state memory. It supports real-time monitoring when connected to a PC via USB, allowing users to record data directly while viewing it on screen.
Documented functional capabilities include:
- Sensing input transitions or contact closures from external sources such as transducers and state initiators
- Recording time-stamped events with a real-time clock
- Scaling engineering units to display measurement states (e.g., on/off, open/closed)
Operating Conditions & Performance
The OM-CP-STATE101A operates in ambient temperatures from -40 to 80°C (-40 to 176°F) and humidity levels of 0 to 95% RH non-condensing. The device is powered by a user-replaceable 3.6V lithium battery, with a typical life of 10 years dependent upon frequency and duty cycle.
Key performance specifications include:
- Input Range: 0 to 30V
- Time Resolution: 4 Hz (reading rate selectable in software)
- Reading Rate: Configurable from 4 Hz to 1 every 24 hours
- Memory Capacity: 406,323 readings with software-configurable memory wrap
- Time Accuracy: ±1 minute/month at 20°C (68°F) for stand-alone data logging
The device features a green LED that blinks at a 10-second rate to indicate logging and at a 15-second rate to indicate delay start mode. A red LED blinks at a 10-second rate to signal low battery or full memory.
Configuration Options
The series supports various configuration options for connectivity, power replacement, and environmental protection. The data logger itself is housed in ABS plastic with dimensions of 36 H x 56 W x 16 mm D (1.4 x 2.2 x 0.6") and weighs 24 g (0.9 oz).
Available options and accessories include:
- OM-CP-IFC200: Windows software and a 3.7 m (12') USB interface cable
- OM-CP-BAT105: Replacement 3.6V lithium battery
- OM-CP-WATERBOX101A: Weatherproof NEMA 4 (IP65) enclosure made of black anodized aluminum, measuring 74 H x 148 W x 39 mm D (2.9 x 5.8 x 1.5")
- OM-CP-WATERBOX101A-KIT: Maintenance kit for the waterbox enclosure
The device connects via a removable screw terminal and interfaces with computers using USB (interface cable required) at 115,200 baud. It is compatible with Windows XP SP3, Vista, 7, and 8 (32 and 64-bit). The software allows data to be displayed in graphical or tabular format, printed, or exported to text or Microsoft Excel files.
Key Product Differences
The OM-CP-STATE101A offers multiple start modes including immediate start, delay start up to 18 months, and a multiple pushbutton start/stop function. The multiple start/stop mode allows the device to be started and stopped repeatedly without downloading data or communicating with a PC.
Operational control can also be managed via software: units can be started and stopped directly from a computer. Additional features include optional password protection to restrict access to configuration options, field upgradability for firmware (free upgrades offered for the life of the product), and ultra-high speed download capability. The device carries CE certification and includes a 5-year warranty.
PDFs & Manuals
Software & Drivers
