United Kingdom 0800 488 488 | Intl +44 (0) 161 777 6611 | Welcome to our new website, found an issue or bug? Please report it here
Series-616W
Differential Pressure Transmitter, ± 0.25% Accuracy, NEMA 4X, 4-20 mA Output
- NEMA 4X rated enclosure provides protection in harsh environments permitting outdoor monitoring or in areas where dust and particulate matter exists
- Easy to read LCD display provides immediate local alerts allowing corrective action to be taken quicker to eliminate the problem from becoming widespread
- Zero and span controls provides easy calibration checks and shorter installation time to get device running and monitoring
Series-616W
From
£
302.24
Product Overview
- Accuracy Detail ± 0.25% FS @ 77°F (25°C), display accuracy ± 0.5%
- Electrical Connection Screw Terminal
- Enclosure Ratings IP66, NEMA Type 4X
- Long Term Stability ± 1% FS/year
- Materials, Wetted Consult Factory
- Media Compatibility Clean dry air / inert gas, HVAC / room air, Inert / non-reactive gases, Helium, Nitrogen, Non-Conductive Gases, Non-Corrosive Dry Gases
- Mounting Note Not Position Sensitive
- Operating Temperature, Max 70 °C
- Operating Temperature, Min -20 °C
- Measurement Pressure Type Differential
- Process Connection Note Barbed, dual size to fit 1/8˝ and 3/16˝ (3.12 and 4.76 mm) ID rubber or vinyl tubing
- Process Connection Size 1/8 in, 3/16 in
- Process Connection Type Stepped Barb Fitting
- Series ID Series-616W
- Span Adjustment Push Button
- Supply Power Type AC/DC
- Wire Gauge 26 to 16 AWG
- Zero Setting Adjustable Range Push button
Positive, negative and differential pressures can be measured within a full span accuracy of ±0.25 with the Series 616W Differential Pressure Transmitter. Units are enclosed in a polycarbonate case, rated NEMA 4X (IP66) and operate by sensing the pressure of air and compatible gases then sending a standard 4-20 mA output signal. Design enables operation in 2-wire current loops. A wide range of models are available factory calibrated to specific ranges. The span and zero controls are for use when checking calibration. They are not intended for re-ranging to a significantly different span. The LCD display allows local indication of pressure.
NIST CALIBRATION available in Product Configurator.
Product Applications
- Dust collection
- Outdoor HVAC
- Roof-top equipment
Accessoires
Static Pressure Sensors – 4" Insertion Depth – For Manometers & Gages
From £5.20
0 In Stock