Series-1800

Compact Low Differential Pressure Switch, 2% Repeatability, UL/CSA/FM Approved

Compact size and repeatability provide a high-value switch for many industrial applications
Designed for panel and wall mounting to easily meet mounting requirements in most industrial settings
Pressure ranges from 0.07 in w.c. to 85 in w.c. make this switch suitable for a wide range of applications

Produktübersicht anzeigen

Series-1800

Von ^£ 100.86

Modelle einkaufen

9 Variationen verfügbar

Alle Serienoptionen unten anzeigen

Datenblatt

Produktübersicht

Applications Industrial and Manufacturing, Process Automation and Control
Compliance Note CE, CSA, FM, UL. Optional-EXPL explosion-proof enclosure does not possess any compliance
Electrical Connection Screw Terminal
Materials, Wetted Consult Factory
Media Compatibility Clean dry air / inert gas, HVAC / room air, Inert / non-reactive gases, Helium, Nitrogen, Non-Corrosive Dry Gases
Mounting Orientation Vertical Diaphragm
Operating Temperature, Max 180 °F
Operating Temperature, Min -30 °F
Measurement Pressure Type Differential
Process Connection Size 1/8 in
Process Connection Type NPT Female
Proof Pressure Up to 10 psi
Repeatability ± 2%
Series ID Series-1800
Set Point Adjustment Internal Screw
Switch Note 15 A @ 120-480 VAC, 60 Hz. Resistive 1/8 HP @125 VAC, 1/4 HP @ 250 VAC, 60 Hz. De-rate to 10 A for operation at high cycle rates
Switch Rating 15 A @ 120-480 Vac, 1/8 HP @ 125 Vac, 1/4 HP @ 250 Vac
Switch Type SPDT NO/NC, Selectable
Weight 595 g

Essential for industrial environments, the Series 1800 Low Differential Pressure Switch for general industrial service combines small size and low price with 2% repeatability for all but the most demanding applications. Set point adjustment inside the mounting stud permits mounting the switch on one side of a wall or panel with adjustment easily accessible on the opposite side. UL and CSA listed, and FM approved.

CAUTION: FOR USE ONLY WITH AIR OR COMPATIBLE GASES.

Please see Series AT-1800 for ATEX approved.