SCE-PBSS-PBXSS

Supported Applications

The Omega SCE-PBSS and PBXSS series comprises NEMA Type 4x stainless steel pushbutton enclosures designed for use with 30.5 mm (1.2 in) and 22.5 mm components, including pushbuttons, switches, and pilot lights. These enclosures are engineered specifically for wet, hosed-down, and corrosive environments where protection against water ingress and chemical exposure is required.

Operating Conditions & Performance

The series features a housing constructed from 0.075" Stainless Steel Type 304 to provide durability in harsh conditions. The enclosures meet the following ratings:

• NEMA Type 4, 4X, 12 & 13
• UL Listed Type 4, 4X, & 12
• CSA Type 4, 4X & 12
• IEC 60529 IP 66

The series is backed by a 1 YEAR WARRANTY. Specific operating or storage temperature ranges, vibration ratings, and shock ratings are not explicitly stated in the provided documentation.

Hole Size Dimensions

• 22 mm: Hole diameter A = 22.5 (0.89) mm/in; Depth B = 4.8 (0.19); Thickness C = 34.7 (1.36)
• 30 mm: Hole diameter A = 30.5 (1.22) mm/in; Depth B = 3.2 (0.13); Thickness C = 24.7 (0.97)

Configuration Options

The SCE-PBSS and PBXSS series offers a range of enclosure sizes to accommodate varying numbers of components, with dimensions provided in inches for height, width, and depth.

• SCE-1PBSS: 3.50" H x 3.25" W x 2.75" D
• SCE-2PBSS: 5.75" H x 3.25" W x 2.75" D
• SCE-3PBSS: 8.00" H x 3.25" W x 2.75" D
• SCE-4PBSS: 10.25" H x 3.25" W x 2.75" D
• SCE-4PBXSS: 10.00" H x 4.00" W x 4.75" D
• SCE-45PBSS: 7.25" H x 6.25" W x 3.00" D
• SCE-6PBSS: 9.50" H x 6.25" W x 3.00" D
• SCE-9PBSS: 9.50" H x 8.50" W x 3.00" D
• SCE-12PBSS: 11.75" H x 8.50" W x 3.00" D
• SCE-16PBXSS: 11.75" H x 10.75" W x 4.75" D

The series supports special ordering in Type 316 Stainless Steel.

Key Product Differences

Variants within the SCE-PBSS and PBXSS series are distinguished by enclosure size (indicated by numeric suffixes such as -1, -2, -45) and component compatibility. The standard model numbers follow the format SCE-<NUMBER> - <HOLE SIZE>. For enclosures designed for 22 mm hole sizes, an 'I' is added to the end of the model number (e.g., SCE-1PBSSI) at no additional cost. Models ending in PBXSS denote specific dimensional configurations distinct from standard PBSS models.