Italia 800 906 907 | Internazionale +39 022 333 1521 | Benvenuti sul nostro nuovo sito web. Avete riscontrato un problema o un bug? Segnalatelo qui.
FSW40-50-Series
Interruttori di flusso industriali - Da 2 a 15 piedi al secondo
Industrial Flow Switches - From 2 to 15 Feet/second- Rugged Industrial Design
- Switch Point Adjustable While Unit Is Operating
- 15 A SPDT Switch Directly Controls Pump
- Mounts in Any Position
FSW40-50-Series
Da
£
518.95
Panoramica del Prodotto
- Electrical Connection Cable Gland for 1/4 in Cable with Screw Terminal block
- Electrical Connection Note Electrical Cable Fitting: Water resistant for cable diameter 0.250" ±0.025"
- Media Compatibility Liquids
- Operating Temperature, Min 4 °C
- Pressure Drop Note 1 to 3" pipe, less than 1 psi; 4" and above, negligible
- Process Connection Type NPT Male
- Sensitivity 10% @ upper end of range; 30% @ lower end of range
- Series ID FSW40-50-Series
- Switch Rating 15 A
- Switch Rating Note 15 A @ 125 or 250 Vac; 10,000,000 operations median
- Switch Type SPDT NO/NC, Selectable
- Volumetric Flow Rate, Max 0 GPM
- Volumetric Flow Rate, Min 0 GPM
The FSW-40A and FSW-50 Series flow switches feature 15 A SPDT switches and an internal screw adjustment for in-line monitoring of switch points. Multiple drag disks provide incremental switch point adjustment. Their non-magnetic design makes these switches ideal for applications in which rust is a problem. The FSW-40A Series has a brass and stainless steel construction (optional 316 SS), while the FSW-50 Series comes in a plastic/316 SS construction.
The FSW-40A Series is ideal for machine-cutting oils and for sewage applications in which large objects are not caught on the drag disks. Installation "T" fittings are recommended for installing switches for 2' pipe size and below. For other pipe sizes, a † œtee† fitting or weld coupling can be used.
The FSW-40A Series is ideal for machine-cutting oils and for sewage applications in which large objects are not caught on the drag disks. Installation "T" fittings are recommended for installing switches for 2' pipe size and below. For other pipe sizes, a † œtee† fitting or weld coupling can be used.
PDF & Manuali
