DPI8-AL-DC

iSeries 1/32, 16, 1/8 DIN, Temperature/Process Meters with Alarm Outputs

Click and hold to zoom

form-factor

1/8 DIN 1/16 DIN 1/32 DIN

Display Type

4 Digit, 9 Segment LED 4 Digit Single LED

Supply Voltage

12 to 36 Vdc 90 to 240 Vac

£408.48 / each

Item# DPI8-AL-DC

Added to Your Shopping Basket

In Stock

Lead Time (If not in stock): 58 weeks

Brand
Accuracy	± 0.5 °C
Accuracy Detail	±0.5°C temperature; 0.03% rdg
Additional Features 1	Programmable 3 Color Display
Alarm modes	Band, High/Low, Latch/Unlatch, Normally Open/Closed, Process/Deviation
Control Output	2 SPDT Relay
Current Measurement Range	0 to 20 mA
Display Size	21 mm (.82 in)
Display Type	4 Digit, 9 Segment LED
Display Type Note	None
Enclosure Ratings	NEMA Type 1
Form factor	1/8 DIN
GrossWeightValue	0.93
Height	48 mm
Impedance Input	10 MΩ for 100 mV, 1 MΩ for 1 or 10 Vdc
Input Type	Themocouple, RTD, Current, Voltage
Number of Inputs	1
Operating Temperature, Max	55 °C
Operating Temperature, Min	0 °C
Output Detail	Alarm 1 and 2 Outputs Relay: SPDT, 250 Vac or 30 Vdc @ 3 A (resistive load)
RTD Type	100/500/1000 Ω Pt sensor, 2-, 3- or 4-wire; α= 0.00385 or 0.00392
Reading Rate	3 samples/sec
Relative Humidity	90% RH non-condensing
Sampling Rate	3 Hz (3 updates/second)
Sensor/Transmitter Power	24 Vdc @ 25 mA
Series ID	DPI-AL-Series
Supply Power Note	24 Vac, 12 to 36 Vdc; external power source must meet safety agency approvals
Supply Power Type	DC
Supply Voltage	12 to 36 Vdc
Temperature Stability	RTD: 0.04°C/°C ;Thermocouple @ 25°C (77°F): 0.05°C/°C, cold junction compensation ;Process: 50 ppm/°C ;
Thermocouple Lead Resistance, Max	100 Ω
Thermocouple Type	J, K, T, E, N, R, S, B, C, L
Voltage Measurement Range	0 to 100 mV, 0 to 1 V, 0 to 10 Vdc
Width	96 mm
form-factor	1/8 DIN
Country of Origin	Mexico
See All Specs Show Less

PDFs & Manuals

Compliance