United Kingdom 0800 488 488 | Intl +44 (0) 161 777 6611 | Welcome to our new website, found an issue or bug? Please report it here
FPD2000-Series
High Pressure and Temperature Positive Displacement Flow Meters
This part is no longer available. Please see FPD4000-Series as a suggested replacement.
- Accuracy ±0.5% of Reading
- Includes 3-point NIST certificate
- Aluminum, 303 or 316 SS Bodies
- Pressure Rating Up to 345 bar (5000 psi)
FPD2000-Series
From
£
2,180.86
Product Overview
- Accuracy ± 0.5 %
- Accuracy Detail ±0.5% over 10:1 turndown with 30cP fluid
- Amplitude Note 1 to 40 Vp-p
- Display No Display
- Driving Method 50 mA max resistive load
- Duty Cycle 50 % ± 15 %
- Impedance Output Note 40 Ω - analog switch and self-resetting fuse
- Linearity ±0.01% rdg
- Media Compatibility Hydraulic fluids, Oils / lubricants, Oil
- Operating Pressure, Max 5000 psi
- Operating Temperature, Max 85 °C
- Operating Temperature, Min -40 °C
- Process Connection Type NPT Female
- Process Temperature, Min 0 °C
- Repeatability ±0.1%
- Series ID FPD2000-Series
- Supply Power Note 8 mA @ 12 Vdc,12 mA @ 24 Vdc
- Supply Power Type DC
The FPD2000 Series represents a positive displacement meter that is affordable and accurate. One primary feature is the ability to maintain consistent accuracy despite changing viscosity conditions. This reliability, coupled with a large turndown range, offers an affordable replacement for older turbine technology. The meter’s solid construction and excellent dynamic response are well suited to the measurement of oil, grease, fuel, solvents, polyurethanes, brake fluid, skydrol as well as other nonabrasive lubricating fluids. Since there is no need for straight run piping upstream or downstream of the flow meter, the FPD2000 flow meters are simple to use and to install. The meters produce good resolution and high accuracy at low flow rates. Flow may be bidirectional, such as for cylinder position measurements, without damage to internal parts.
PDFs & Manuals
