Deutschland 07056-9398-0 | Internationale Rufnummer ++49 (0) 7056-9398-0 | Willkommen auf unserer neuen Website! Haben Sie einen Fehler oder ein Problem entdeckt? Bitte melden Sie es hier.
FMG980-Series
Fest eingestellter Einbautiefen-Elektromagnetischer Durchflussmesser
Fixed Depth Insertion Electromagnetic Flow Meter- No Moving Parts
- Durable
- Easy to Install
- Easy to Maintain
FMG980-Series
Von
Produktübersicht
- Accuracy ± 1 %
- Accuracy Detail ± 1% of full scale
- Approvals CE
- Conductivity > 20 µS/cm
- Empty Pipe Detection Defaults to zero flow
- Insertion Type Standard
- Media Compatibility Conductive liquids, Corrosive chemicals / acids / bases, Saltwater / brines
- Number of Outputs 1
- Operating Temperature, Max 72 °C
- Operating Temperature, Min -17 °C
- Output Detail Square wave pulse, opto isolated, 550 Hz @ 20 ft/sec
- Output Signal DC Pulse
- Process Connection Type Saddle
- Process Temperature, Min 0 °C
- Series ID FMG980-Series
- Supply Power Note Full Power: 12 to 25 Vdc, 250 mA , Low Power: 12 to 25 Vdc, 40 mA average with 250 mA peaks
- Supply Power Type DC
- Supply Voltage 12 to 25 Vdc
- Velocity, Max 20 ft/s
- Velocity, Min 0.28 ft/s
Electromagnetic insertion type flow meters are designed for use with conductive liquids in 25 to 305 mm (1 to 12") pipe. A choice of materials (stainless steel, brass, and PVC) allows the meter to adapt to a range of temperature, pressure, and corrosive environments. The FMG980 is highly suitable for difficult applications with changing viscosities and pulsating flows, such as air-driven diaphragm pumps. With no moving parts, these meters can be used in “dirty” applications where debris would foul a mechanical meter. Like all magmeters, when used in chemical injection applications, these meters should be installed upstream of the chemical line (or far enough downstream to allow complete mixing of fluids before the meter). Designed for modularity and versatility, the FMG980 Series has a current-sinking pulse output that can be combined with a transmitter or indicator. For analog output and display of rate and total, an FMG980 display can be used. Blind analog output is provided by the FMG-1000-MAW. FMG980 Series fixed depth insertion meters require special fittings for installation.
PDFs & Handbücher
