United Kingdom 0800 488 488 | Intl +44 (0) 161 777 6611 | Welcome to our new website, found an issue or bug? Please report it here
DMD4059
Choose a Variant
Input Type
Added to Your Shopping Basket
Configuration complete.
Please add to basket to keep it or exit the configuration
Please add to basket to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Additional Features 1 | Standard Voltage isolated |
| Adjustments | ±5% Via Multi-Turn Potentiometer |
| CMRR | 100 db min |
| Electrical Connection | Screw Terminal |
| Electrical Output | 0 to 25 mA |
| Enclosure Ratings | IP40 |
| Excitation Voltage | Selectable 0 to 10 Vdc |
| GrossWeightValue | 0.55 |
| Height | 117 mm |
| Impedance Input | 200 kΩ typical |
| Input Range Note | Input Range: 100 to 10,000 Ω bridges @ 10 Vdc, drives up to four 350 Ω bridges @ 10 Vdc;Minimum: 0 to 5 mV range, 0.5 mV/V sensitivity;Maximum: 0 to 400 mV range, 40 mV/V sensitivity |
| Input Type | Voltage |
| Isolation | 1200 Vrms minimum, 3-way isolation, power to input, power to output and input to output |
| Length | 122 mm |
| Linearity | Output Linearity, Ripple and Noise: Better than ±0.1% of span, <10 mV rms ripple and noise |
| Mounting | DIN Rail 35 mm Standard |
| Number of Inputs | 1 |
| Offset | Zero Offset (Tare): ± 100% of span in 15 % increments |
| Operating Temperature, Max | 60 °C |
| Operating Temperature, Min | -10 °C |
| Output Detail | Output Ranges: Voltage (10 mA max): 0-1 to 0-10 Vdc Bipolar Voltage (10 mA max): ±5 or ±10 Vdc Current: 0-2 mA to 0-25 mA Compliance, Drive @ 20 mA: 20V, 1000 Ω drive;current output can be selectively wired for sink or source Function Test Button: Sets output to test level when pressed. Adjustable 0 to 100% of span via potentiometer. Factory default is approx 50% of span Maximum Output: 10 Vdc @ 120 mA |
| Output Ripple | Better than ±0.1% of span, <10 mV rms ripple and noise |
| Output Signal | Current, Voltage |
| Output Value | Process |
| Power Consumption | 2 to 5 W |
| Resistance Accuracy | Better than ±0.01% per 1 Ω change in leadwire resistance |
| Response Time | 70 ms typical |
| Sensor/Transmitter Power | Up to 4- 350 Ω bridges @ 10 Vdc |
| Series ID | DMD4059-Series-Sig-Cond |
| Stability | ±0.01% per °C, Thermal: Better than ±0.02% of span per °C |
| Supply Power Note | 80 to 265 Vac, 50/60 Hz or 85 to 300 Vdc, 2 W maximum |
| Supply Power Type | AC/DC |
| Supply Voltage | 80 to 265 Vac, 85 to 300 Vdc |
| Temperature Stability | ±0.01% per/°C; Better than ±0.02% of span per °C |
| Voltage Measurement Range | 0 to 400 mV |
| Voltage Output Range | 0 to 10 Vdc |
| Weight | 159 g |
| Width | 22.5 mm |
| Wire Gauge | 14 AWG |
| Country of Origin | United States |
| See All Specs | |
PDFs & Manuals