1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
RTD-Extwire
Copper Extension Wire, for Sanitary RTD and Thermistor
Models In Stock
- Available with PFA, Fiberglass or PVC Insulation and Outer Jacket
- #24 or #26 AWG Stranded Nickel Plated Copper Conductors Available in Most Styles
- Red/Black or Red/White Color Codes Available in Most Styles
- Available with Optional Stainless Steel Overbraid
RTD-Extwire
From
$
39.95
Models In Stock
Product Overview
- Alloy Material (-) Copper
- Alloy Material (+) Copper
- Connector A Stripped Leads
- Operating Temperature, Max 482 °C
- Series ID RTD-Extwire
- Temperature Sensor Type RTD or Thermistor
This cable is great for use as extension wire. Available in 2, 3 and 4 wire constructions, two color codes (red/black or red/white), three insulation and jacketing materials (PFA, Fiberglass and PVC) and three conductor sizes (#20 AWG Solid, #24 or #26 AWG Stranded) this cable will work with a wide variety of applications. Standard spool lengths include 25, 50, 100, 200, 500 and 1000 feet.
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
Yavne G CTM Magnetics from
Great product
Good product - no problems - the length is always right
Date published: 2023-06-12
Rated 5 out of
5
by
Greg K FLA from
High Quality
High Quality, works well. We use this for our thermistor and get consistent readings.
Date published: 2023-03-13
Rated 5 out of
5
by
Miller from
Exactly what I needed
Exactly what I needed. Works really well for the application in which I was using it.
Date published: 2021-04-30
How do you strip the white jacket/insulation off of the 4 wire RTD? I have a problem nicking the black and red insulated wires. I also have a major fraying issue with all of the insulation on these.
Thank you for connecting with Omega.
We have large automated machines that do the wire stripping for our production.
Unfortunately we no longer sell the handheld thermal wire strippers.
Date published: 2019-11-16
Hi, I’m looking for a 4-wire RTD for a setup that requires very high-precision temperature measurements. Do you have any recommendations? Also, are these 4-wire RTDs typically vacuum compatible?
There are what is known as 1/10 DIN accuracy RTD's which have the highest precision. If you use a sheathed probe RTD and extend it into the Vacuum those are compatible but other types would need to be reviewed. You can send follow up questions to temp@dwyeromega.com.
Date published: 2025-06-16
What is the minimum bend radius of this cable? Thanks,
Thank you for your inquiry. The minimum bend radius is dependent on the wire gage and the number of conductors (2, 3 or 4). Feel free to email the specific part number to temp@omega.com and we can review and advise.
Date published: 2021-10-21
What is the difference between EXTT-2CUI-26S and EXTT-2CU-26S
Thank you for your inquiry. The only difference is: EXTT-2CUI-26S has the IEC color code standard which would be a red and a white wire and EXTT-2CU-26S has the ANSI color code standard which would be a red and a black wire.
Date published: 2023-09-29
What are the dimensions of the EXPP-4CU-24S?
Thank you for your inquiry! Each of the 24-AWG wires has a diameter of 0.0201 inches. When all four wires are pressed together they will form a nominal length and width of .0402 inches.
Date published: 2021-05-04
What is the Nickel to Copper Ratio?
Hi Meredith,
Thank you for the inquiry. Please forward this question to TEMP@OMEGA.COM
Best regards
OMEGA
Date published: 2022-08-24
What is the process(manufacture) standard the RTD extension wire conforms to？
Hi Morton,
Thank you for the inquiry. We offer both ANSI and IEC color code for RTD wire. If you have further questions on standards please forward them to TEMP@OMEGA.COM.
Best regards
OMEGA
Date published: 2020-08-01