United Kingdom 0800 488 488 | Intl +44 (0) 161 777 6611 | Welcome to our new website, found an issue or bug? Please report it here
DPI-Series
1/32, 1/16, 1/8 DIN, Programmable Temperature/Process Meters
- Universal input meter accepts thermocouple, RTD, voltage, and current signals
- Bright red LED display with selectable engineering units and resolution
- Fully programmable alarms, scaling, and control outputs for process flexibility
- High accuracy and fast response ideal for precision process monitoring
DPI-Series
From
£
236.81
Product Overview
- A/D Conversion Dual slope
- Additional Features 1 Programmable 3 Color Display
- Approvals UL, C-UL, UKCA, CE per 2014/35/EU
- CMRR 120 dB
- Configuration Single-ended
- Control Action Action: Reverse (heat) or direct (cool)
- Control Output SPDT Relay, Alarm
- Cutout Dimensions 45 mm
- Digital Filter Programmable
- Display Range -1999 to 9999
- Display Type 4 Digit LED
- Electrical Connection Screw Terminal
- Frequency 50 to 400 Hz
- Impedance Input 10 MΩ for 100 mV ;1 MΩ for 1 or 10 Vdc
- Input Current 0 to 20 mA (5 Ω load)
- Isolation Power to Input/Output: 2300 Vac per 1 minute test For Low Voltage Power Option: 1500 Vac per 1 minute test Power to Relay/SSR Output: 2300 Vac per 1 minute test Relay/SSR to Relay/SSR Output: 2300 Vac per 1 minute test RS232/485 to Input/Output: 500 Vac per 1 minute test
- Length 127 mm
- Linearization Points Up to 10
- NMRR 60 dB
- Number of Inputs 1
- Operating Temperature, Max 55 °C
- Operating Temperature, Min 0 °C
- Operating Temperature Note 0 to 55°C (32 to 131°F) 90% RH non-condensing
- Output Detail Relay: 250 Vac or 30 Vdc @ 3 A (resistive load); configurable for on/off, PID, and ramp and soak Output 1: SPDT, can be configured as an alarm 1 output Output 2: SPDT, can be configured as an alarm 2 output SSR: 20 to 265 Vac @ 0.05 to 0.5 A (resistive load); continuous DC Pulse: Non-isolated; 10 Vdc @ 20 mA Analog Output (Output 1 Only): Non-isolated, proportional 0 to 10 Vdc or 0 to 20 mA; 500 Ω max Output 3 Retransmission Isolated Analog Voltage and Current Current: 10 V max @ 20 mA output Voltage: 20 mA max for 0 to 10 V output
- Polarity Unipolar
- Reading Rate 3/sec
- Relative Humidity 0.9
- Sampling Rate 3 Hz (3 updates/second)
- Sensor/Transmitter Power Note 5 Vdc @ 40 mA; 10 Vdc @ 60 mA (Optional In Place Of Communication)
- Series ID DPI-Series
- Span Adjustment 0.001 to 9999 counts
- Step Response 0.7 sec for 99.9%
- Thermal Effects -1999 to 9999
Supported Applications
The DPI Series is a family of microprocessor-based digital panel meters from the OMEGA® iSeries, built for temperature, process, and strain measurement in industrial monitoring and control panels. Offered in three true DIN sizes with NEMA 4 (IP65) rated front bezels, these instruments drop into machine consoles, process skids, and instrumentation cabinets where a clear, configurable digital readout is required.
Universal temperature and process models accept a broad selection of thermocouple, RTD, and process transducer and transmitter inputs, while dedicated strain and process models handle load, pressure, and voltage or current signals. With optional serial and Ethernet communications, the DPI Series suits data acquisition, remote monitoring, and networked plant systems as readily as standalone panel indication.
Operating Conditions & Performance
DPI meters run on a universal supply of 90 to 240 Vac ±10%, 50 to 400 Hz, with a low-voltage DC option covering 12 to 36 Vdc and 24 Vac. They deliver a fast display response of 0.7 sec for 99.9% of a step change, resolving temperature to 0.1°C and process inputs down to the microvolt level.
Universal temperature and process inputs span wide measurement ranges depending on sensor type, including a J thermocouple range of -210 to 760°C (-346 to 1400°F) and a K thermocouple range up to -160 to 1372°C (-256 to 2502°F), with thermocouple accuracy as tight as 0.4°C (0.7°F). The instruments operate over an ambient range of 0 to 55°C (32 to 131°F) at up to 90% RH non-condensing, and their NEMA 4/IP65 front bezel protects the display against dust and wash-down in the panel face.
Configuration Options
The DPI Series differentiates its models along several clear axes so a configuration can be matched to the panel and the signal:
- DIN size — models are offered in 1/8, 1/16, and 1/32 DIN formats to fit the available cutout, all sharing a common 127 mm case depth.
- Input class — DPi models cover universal temperature and process inputs, while DPiS models are configured for strain and process signals.
- Analog output — the A designation (for example DPi8A and DPi16A) adds a proportional analog retransmission output.
- Compact depth — the C designation (for example DPi8C and DPiS8C) provides a reduced-depth housing for shallow enclosures.
Communications and power options are added through ordering suffixes: -EIT for Ethernet with embedded internet, -C24 for isolated RS232 and RS485, -C4EIT for an Ethernet Web server plus an isolated RS485/422 hub, and -DC for the low-voltage DC power input.
Key Product Differences
The core DPI lineup is organized by DIN size, input class, and feature set:
- DPi8, DPi8A, DPiS8, and DPi8C/DPiS8C — 1/8 DIN temperature/process, analog-output, strain/process, and compact-depth models.
- DPi16, DPi16A, and DPiS16 — 1/16 DIN temperature/process, analog-output, and strain/process models.
- DPi32 and DPiS32 — 1/32 DIN temperature/process and strain/process models.
Each base model can be extended with the communications and power suffixes above, and the range is supported by the DPP-5 1/8 DIN panel punch accessory for preparing the panel cutout.
PDFs & Manuals
Software & Drivers
