1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
PTRSSeries
Tubes de protection OMEGATITE 650® avec accessoires optionnels
OMEGATITE 650® Protection Tubes with Optional Fittings
Modèles en stock
- High Temperature
- Thermal Shock Resistance
- Corrosion Resistance
PTRSSeries
Depuis
C$
935.38
Modèles en stock
L'aperçu du produit
- Bulk Density 3.24 g/cm³
- Cold Bend Strength 110 kpsi
- Cold Bend Strength Note 758 Mpa, 110 kpsi (25°C)
- Critical Temperature 950 °C
- Elastic Modulus 4.2E7 psi
- Elastic Modulus Note 288 GPa, 42 x 10^6 psi
- Hardness 1650 HV
- Hardness Note 1650 VHN, 1 kg load
- Hot Bend Strength 58 kpsi
- Hot Bend Strength Note 400 Mpa, 58 kpsi (1200°C)
- Operating Temperature, Max 1250 °C
- Operating Temperature, Min 0 °C
- Porosity <1 %
- Sensing End Closed
- Specific Gravity 3.26
- Thermal Conductivity 21 W/mK
- Thermal Conductivity Note 21 W/mK at 400°C
- Thermal Expansion Coefficient 3.0 x 10^-6 C^-1
- Thermal Expansion Coefficient Note 3.0 x 10^-6 C^-1 at 20 to 1000°C
- Tube Material Silicon Nitride and Aluminum Oxide
OMEGATITE650 is an alloy of silicon nitride and aluminum oxide. This superior refractory material has the combined properties of silicon nitride (high strength, hardness, fracture toughness, and low thermal expansion) and aluminum oxide (corrosion resistance, chemically inert, high temperature capabilities, and oxidation resistance).
Most refractory products can be used only in high temperature applications where one or two of the following properties are required: thermal shock resistace, mechanical strength, corrosion resistance, abrasion resistance or electrical insulation. OMEGATITE 650 combines all these properties in one refractory material.
OMEGATITE 650 is uniquely qualified for nonferrous molten metal applications and high wear or high impact environments up to 1250°C. OMEGATITE 650 is non-wetting for most nonferrous metals. It is gas tight, chemically inert, resistant to corrosion and metal attack, and features high strength, hardness, and thermal shock resistance.
OMEGATITE 650 thermocouple sheaths are used extensively for continuous measurements in nonferrous metals. In molten aluminum, OMEGATITE 650 is thermal shock resistant, non-wetting, does not contaminate the melt, provides continuous, reliable temperature measurement, and is resistant to degradation even in aggressive aluminum lithium alloys. The excellent corrosion resistance of OMEGATITE 650 allows the use of thinner walls, thereby providing faster response time and improved accuracy.
Most refractory products can be used only in high temperature applications where one or two of the following properties are required: thermal shock resistace, mechanical strength, corrosion resistance, abrasion resistance or electrical insulation. OMEGATITE 650 combines all these properties in one refractory material.
OMEGATITE 650 is uniquely qualified for nonferrous molten metal applications and high wear or high impact environments up to 1250°C. OMEGATITE 650 is non-wetting for most nonferrous metals. It is gas tight, chemically inert, resistant to corrosion and metal attack, and features high strength, hardness, and thermal shock resistance.
OMEGATITE 650 thermocouple sheaths are used extensively for continuous measurements in nonferrous metals. In molten aluminum, OMEGATITE 650 is thermal shock resistant, non-wetting, does not contaminate the melt, provides continuous, reliable temperature measurement, and is resistant to degradation even in aggressive aluminum lithium alloys. The excellent corrosion resistance of OMEGATITE 650 allows the use of thinner walls, thereby providing faster response time and improved accuracy.
Afficher les notes et les avis