1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
HSRTD-3-100-A-40-E
FLEXIBLE SEALED PFA RTD SENSOR
Choose a Variant
Accuracy
Electrical Connection
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | Class A |
| Accuracy Detail | Class A per IEC60751 |
| Cable Length | 40 in |
| Electrical Connection | Stripped Leads |
| Insulation | PFA |
| Nominal Resistance | 100 Ω |
| Number of Wires | 4 |
| Process Temperature, Max | 250 °C |
| Process Temperature, Min | -60 °C |
| Temperature Coefficient | 0.00385 Ω/Ω/°C |
| Temperature Coefficient Note | α = 0.00385 Ω/Ω/°C |
| Temperature Sensor Type | RTD |
| Tip Diameter | 3 mm |
| Wire Gauge | 26 AWG |
| Wire Type | Stranded |
| See All Specs | |
Accessories
3-Prong Mini flat pin Connector for Thermocouple, RTD and 3-Wire Thermistor
C$8.70
550 In Stock
Show Ratings & Reviews
Rated 4 out of
5
by
PROVE IT from
Resistant to magnetic flux change
I have probably purchased 30 of these over the last 5 years. They perform much better than bimetallic thermocouples for reading temperature in magnetic induction applications. The durability is good, but not outstanding in harsh environments, especially in steam at temperatures greater than 120°C (thus the purchase of 30 over the last 5 years). Their response is faster than metal clad RTDs. The rapid response allows for more contained PID controll. It would be wonderful if Omega made a steam-tolerant packing gland for the RTD where the RTD tip was not in contact with a metal (as is the case in a thermowell).
Date published: 2016-07-01
Rated 5 out of
5
by
BMJa from
RTD Probe
The RTD probe arrived quickly and is as described. The materials seem high quality and it performs as expected.
Date published: 2025-01-22
Rated 5 out of
5
by
jricha00 from
Durable and easy to use
I use these to measure the temperature on the backside of PV modules. The RTDs are easy to use and they are very durable. The pre-tinned wire leads make installation very easy.
Date published: 2020-09-14