India +91 8925807296 | Welcome to our new website, found an issue or bug? Please report it here
EMTS-3-HEATER
Stainless Steel Immersion Heater 2 in NPT Corrosive Solutions
스테인리스 스틸 침지 히터 2인치 NPT 부식성 용액용
옵션 제공:
- 컴팩트한 0.475인치 직경 전해 연마 산업용 등급 스테인리스강(예: 304/316 SS)
EMTS-3-HEATER
From
2,682,496
원
Product Overview
- 폼팩터 스크류 플러그 침수
- 가열 매체 물
- 프로세스 연결 크기 2인치
- 프로세스 연결 유형 NPT 수나사
- 스크류 플러그 재질 스테인리스 스틸
- 시리즈 ID EMTS-3-HEATER
- 외장 직경 0.475 in
- 보호관 재질 패시베이트 스테인리스 스틸
Supported Applications
The Omega OMEGALUX® EMTS-3 Series is a process water immersion heater featuring a compact design with three heating elements integrated into a single fitting. The electropolished stainless steel sheath construction makes the series well suited for mild corrosive solutions commonly found in industrial applications.
Operating Conditions & Performance
The EMTS-3 Series operates across a wattage range of 3 to 18 kW, with power supply options including 208, 240, and 480 Vac at either 1 or 3 phase. The heating elements utilize a passivated stainless steel sheath with a diameter of 1.2 cm (0.475"). Process connection is provided via a 2 NPT electropolished stainless steel screw plug.
Performance specifications vary by model wattage, with surface loading ranging from 38 to 47 W/in² depending on the selected power rating and dimensions. The series supports overall lengths varying from 20 cm (7¾") for lower-wattage models up to 120 cm (47⅛") for higher-capacity configurations.
Configuration Options
The EMTS-3 Series is configurable across multiple parameters including wattage, voltage, phase, and enclosure type. The following capabilities are available within the series envelope:
- Wattage Ratings: 3 kW, 4.5 kW, 6 kW, 7.5 kW, 9 kW, 12 kW, 15 kW, and 18 kW.
- Voltage & Phase: Configurable for 208 Vac, 240 Vac, or 480 Vac; available in single-phase (1P) or three-phase (3P).
- Enclosure Options:
- E1: General purpose enclosure.
- E2: Moisture-resistant/explosion-resistant enclosure.
- Materials: Electropolished stainless steel sheath and passivated stainless steel wetted parts.
Model numbers follow the format EMTS-<kW>/<Voltage>/<Phase>, with specific suffixes required for three-phase power (e.g., "3P") and voltage designation (e.g., "208V", "240V", or "480V").
Key Product Differences
The series distinguishes between two primary enclosure configurations, identified by the model suffix:
- E1 (General Purpose): Models with general purpose enclosures are UL listed and CSA certified. This certification applies except for models that exceed 48 amps.
- E2 (Moisture-Resistant/Explosion-Resistant): Models designated with the E2 suffix feature moisture-resistant or explosion-resistant enclosures. These units are CSA NRTL/C certified, excluding models exceeding 48 amps.
The series also offers variations in physical dimensions and weight corresponding to wattage; for example, a 3 kW unit weighs approximately 2 kg (5 lb), while an 18 kW configuration may weigh up to 5 kg (12 lb) depending on the specific length variant selected.
PDFs & Manuals
RoHS 2015/863 - View Certificate
CE Approved
UL Listed
CSA