1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
PP3-PP6-PP10
Thermocouple Temperature Profile Probes
Models In Stock
PP3-PP6-PP10
From
C$
832.62
Models In Stock
Product Overview
Show Ratings & Reviews
Rated 4 out of
5
by
Forsmann from
Almost Perfect
I have used two of these for some time. would be nice to get a 24" with 6 TC's at 2" apart readings. Having only the 18" or 36" as choices makes it rough to be very versatile.
Date published: 2016-10-12
Is it possible to have this built with 12 sensors?
Thank you for the inquiry. Yes, these can be made with 12 sensors. Probes are not bendable.
Best regards
OMEGA
Date published: 2021-03-06
How are these calibrated?
Hi Sjay,
Individual probes are checked before assembly. If you require NIST traceable certification, it must be noted part as of initial request.
Best regards,
OMEGA
Date published: 2024-09-25
What is the spacing and thermal isolation of the sensors?
Thank you for your inquiry. 4.5" Spacing between each sensor. No thermal isolation information available.
Date published: 2021-01-30
Would this work in a 60" continuous oven with the probe perpendicular to direction of travel?
Thank you for the inquiry. Profile probe may work for your application. Please forward request to TEMP@DWYEROMEGA.COM.
Best regards
OMEGA
Date published: 2024-12-19
I would like to get a quote for a custom profile probe by email. What I need to change is the distance between the sensors. Also I would like to know what fitting size for the probe since I'm going to use it in pressurized system. Thank you.
Thank you for your inquiry. Please send your custom profile probe request to temp@omega.com and we will review your requirements and respond accordingly.
Date published: 2021-04-23
Looking at profile probe PP6-36-K-U-18. What is the minimum spacing available between the points? We ideally would like 1/2" spacing, but can also accept 1" spacing. Please advise the minimum spacing available. Thanks
On the PP6-36-K-U-18 sensor spacing is at 1.75" and the PP10 probes would be 1.25" spacing. These are standard probes and any alterations would require it to be a Custom product. You can provide a sketch from the product pages data sheet with all the needed parameters and send it to temperature@omega.com.
Date published: 2022-11-18