1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
CL3512A-Series
Calibrateur et thermomètre à thermocouple robuste J,K,T,E
Modèles en stock
- Certificat d’étalonnage traçable NIST à 8 points
- Grand affichage à 31/2 chiffres
- Étalonneur et thermomètre pour TC de type J/K/T/E
- Plage de -220 à 1372°C (-364 à 1999°F)
CL3512A-Series
À partir de
C$
512.39
Modèles en stock
Aperçu du produit
- Précision ± 0.1 %
- Précision ± (0,1 % de la lecture + 1 °C) La précision est spécifiée pour des températures de fonctionnement de 18 à 28 °C (64 à 82 °F), pour 1 an, sans inclure l’erreur du thermocouple ; ± (0,1 % de la lecture + 1 °C) plage de -60 à 1372 °C [± (0,1 % de la lecture + 2 °F) plage de -76 à 1999 °F] ± (0,1 % de la lecture + 2 °C) plage de -60 à -220 °C [± (0,1 % de la lecture + 4 °F) plage de -76 à -364 °F]
- Sélection automatique de l'échelle 0,1° à 1°
- Remarque sur la sélection automatique de l'échelle Résolution de 0,1° à 1° au-dessus de 199,9 (°C ou °F)
- Indicateur de batterie Une indication de batterie faible s'affiche lorsque la tension de la batterie descend en dessous du niveau de fonctionnement
- Autonomie de la batterie 100 heures
- Type d'affichage Écran LCD
- Type d'affichage Remarque Écran LCD 3 1⁄2 chiffres avec une lecture maximale de 1999. Surtension : (-OL) est affiché. Zéro : Automatique
- Hauteur 195 mm
- Longueur 53 mm
- Température de fonctionnement, min 0 °C
- Température de fonctionnement Remarque 0 à 50°C (32 à 122°F) @ <80 % HR
- Polarité Automatique ; positif implicite ; indication de polarité négative
- Humidité relative, max 0,8
- Humidité relative, min 0%
- Résolution maximale 1 °C
- Résolution, min 0 °C
- Remarque sur la résolution 0,1 (à 199,9) ou 1°
- Fréquence d'échantillonnage 1 Hz (1 mise à jour/seconde)
- ID de série CL3512A-Series
- Précision de simulation Précision de mesure ± 1°C
- Température de stockage, max 60 °C
- Température de stockage, min -20 °C
- Remarque sur la température de stockage -20 à 60°C (-4 à 140°F), 0 à 80 % HR avec la pile retirée du compteur
- Tension d'alimentation 9 Vcc
- Type de thermocouple J ; K ; T ; E
- Type de signal RTD Aucun
- Poids 250 g
- Remarque sur le poids Environ 250 g (9 oz)
- Largeur 92 mm
Le calibrateur portable OMEGA CL3512A est un appareil deux en un proposé à un prix très attractif. Le CL3512A est un calibrateur de température, ou calibrateur de thermocouple, qui simule les signaux des thermocouples de type J/K/T/E. Chaque signal est réglable à l'aide des molettes de réglage grossier et fin. Le CL3512A peut également être utilisé comme thermomètre à thermocouple à double entrée de type J/K/T/E. Il est équipé d'un grand écran à 3 1/2 chiffres avec rétroéclairage et sélections d'affichage HOLD, °C/°F et 0,1°/1°.
PDF & Manuels
Accessoires
cables
Câbles de capteur rétractables pour thermocouples, RTD et thermistances
C$59.65 / each
2 En stock
Câbles de capteur rétractables pour thermocouples, RTD et thermistances
C$59.65 / each
3 En stock
Câbles de capteur rétractables pour thermocouples, RTD et thermistances
C$55.28 / each
3 En stock
Câbles de capteur rétractables pour thermocouples, RTD et thermistances
C$57.53 / each
7 En stock
sensors
Sondes thermocouples à usage général avec connecteur miniature à fiche
C$106.70 / each
162 En stock
Afficher les évaluations et les avis
Rated 5 out of
5
by
Otto from
Nice calibrator for thermocouples
This is the second one we bought and we are very happy with the performance. Two inputs and two outputs - for this price - can't go wrong.
Date published: 2016-05-06
Rated 5 out of
5
by
Robert Owen from
Great tool for your tool bag
A great tool for our technicians. Real time data and no guess work needed
Date published: 2025-06-18
Rated 5 out of
5
by
Anonymous from
Unbeatable line of instruments!
Great instrument. Accurate and reliable. Will absolutely buy again and recommend.
Date published: 2024-07-15
Rated 5 out of
5
by
MJH_VT from
A ‘must have’ instrument
Omega
Thermocouple meter / simulator
The ability to measure temperature with a thermocouple and to generate a simulated thermocouple voltage according to a selected temperature, is extremely valuable when debugging thermocouple applications. This model instrument does so at reasonable cost and with NIST traceable calibration certificate.
PROs:
1. 0.1 degree Celsius display resolution up to 200 C.
2. Simulated TC output is variable with Coarse and Fine adjustment controls on the front panel.
3. Battery life is excellent.
4. Legendary Omega precision and reliability.
CONs:
1. Simulator output range selections overlap. For example, 150C is selectable from 2 different simulator output ranges, both of which require the adjust pots to be near the end of their travel. This makes the adjustment more touchy for certain simulator output temperature settings. This is a very minor issue but a noteworthy characteristic.
Overall this is a ‘must have’ instrument for anyone working with thermocouples in applications ranging from field installations to electronics development labs.
Date published: 2023-06-24
Rated 5 out of
5
by
Jason M from
Thermocouple Meter
Great device and simple operation!!!!!!!!!!!!!!!!!!!!!
Date published: 2023-04-10
Rated 5 out of
5
by
University of Tennessee K from
Calibrator Purchase
Great Service with this company in ordering our parts
Date published: 2022-10-10
Rated 5 out of
5
by
Keith B from
Just what I was looking for!
These little units are very easy to use. For output, the dial allows you to select ranges of output, then simply fine tune the setting with the small dials. Outputs are stable and do not wonder. It also reads T/C with easy, both J and K types. I'm using it as a development similar in my lab. I wish it had a digital interface (serial, USB, etc) to make it easier to collect data. But for the price, I can't complain!
Date published: 2022-04-04
Rated 5 out of
5
by
ErikK from
Works fine, good value
Very handy instrument, easy to use for checking out connections and other equipment. Very good specs for the price. We have several of these and they have held up well.
Date published: 2016-10-04
How quick does the temp register on the display?
Hi Stacy,
Thank you for the inquiry. Reading rate is once / second this meter. So within 2 seconds the unit should have steady value for stable input signal.
Best regards,
OMEGA
Date published: 2022-12-16
Can you tell me the county of organ
Thank you for your inquiry. Please email your request to sales@omega.com
Date published: 2024-03-19
I am looking for an instrument that let me probe thermocouples type J, we use this in cure ovens and we would like to know if the thermocouple is still reliable or not in order to keep or replace it, could you recommend me an instrument for it
Hi Francisco,
This calibrator can be used to verify a J thermocouple output if you have a stable bath at a known temperature. For more assistance with your thermocouples please forward request to TEMP@DWYEROMEGA.COM.
Best regards
Omega
Date published: 2024-03-18
How quick of a reading response can I expect going from room temperature to -85C? I'm trying to capture cooling cycle that cools down from room temp to -85C in about 4-5 seconds, and so I'm curious to now if this gauge can capture that
Hi Vass,
Update rate is 1/sec which is common with hand held meters. HH911T has 3/sec update. But most of response time will be due to the probe. Recommend to contact us at TEMP@OMEGA.COM for more details.
Best regards
OMEGA
Date published: 2023-08-07
Can either T1 or T2 be used as an output for simulating a thermocouple to calibrate a device?
Only T1 is used for sourcing Thermocouple signals on the CL3512A calibrator.
Date published: 2022-11-03
How do I turn off the "Beep" sounds when buttons are pressed on the Omega CL3512A digital thermometer?
Hi Jack713,
Thank you for the inquiry. Please forward this request to TEMP@OMEGA.COM
Best regards
OMEGA
Date published: 2024-03-19
How do you calibrate this?
Hi Jodi,
Thank you for the inquiry. Please email request for calibration procedure to TEMP@OMEGA.COM.
Best regards
OMEGA
Date published: 2023-08-07
Could this be used to calibrate a TJ96-IC310SS-116U-4-SB (WNW0204216) Thermocouple that I purchased from you recently. I did not have the thermocouple calibrated, but I am realizing that to match our our probe readings it is necessary?
Hi NickB,
Thank you for the inquiry. To compare the 2 probes you need a good accurate meter to measure the probe output signal. The CL3512A can do this. You also need a stable bath to hold the probes at constant temperature. A container of ice can provide 0 C point. Hot water bath or block calibrator can provide higher level comparison points;
https://www.omega.com/en-us/calibration/temperature-calibrators/dry-block-and-bath-calibrators/p/CL1000
Best regards
OMEGA
Date published: 2021-05-11