Sondes à jonction spéciales à rétreintTJFT72TJFT72
L'aperçu du produit
Cable Length
72 in
Color Code Standard
ANSI
Insulation
PFA
Insulation Note
1.8 m (6') PFA insulated wire with SMPW subminiature male connector
Number of Connectors
N/A
Probe Type
Fine Tip Transition Joint Probe
Process Temperature, Min
0 °C
Temperature Sensor Type
Thermocouple
Tip Diameter
0.02 in
Tip Transition Joint Length
6 in
Wire Gauge
24 AWG
Wire Type
Stranded
Description
Les sondes à jonction de la gamme TJFT72 sont réalisées avec une gaine de 150mm de long et 1,6mm de diamètre, en acier inoxydable 304 ou Inconel 600, des fils de connexion de 1,80m isolés au Téflon et un connecteur mâle SMPW en nylon 220°C chargé de verre miniature male connector. L'extrémité rétreinte de diamètre 0,50mm, procure une excellente réponse thermique à la sonde.
Rated 3 out of
5 by
Jim L from
Careful with High TemperaturesOur probe failed after exposure to 600 C. It was a 1/16" dia. 304SS probe, K-type element. I don't know if the Inconel probe would have survived....make sure to confirm with Tech Support before purchasing.
Date published: 2016-02-22
Rated 5 out of
5 by
Prashanth from
Good sensors, fine tip length can be controlledGood response time for the application I'm using to measure fluid temperature. Length of the fine tip can be more controlled but otherwise does a good job.
What is temperature tolerance (accuracy) for probe TJFT72-K-SS-116G-6-SMPW-M (Type K, SS 304, 6 inches)? This information was not listed on Certificate of Conformance.
Asked by: Ariel
These probes adhere to the Standard Limits of Error specification and would be +/- 1.1C or 0.4% of reading whichever is greater for type K.
